how do i take the lil yellow piece out of the clear sidemarker?

read theards before u post!

www.g20style.com DIY

is there anywhere to buy these?

If you're talking about the sidemarkers, clear ones for both the front yellow and rear red sidemarker, you can get them at www.clearcorners.com or visit the link mentioned above and go to the "DIY" section.

If you're talking about clear side repeaters (those blinker lights on the fender), then you can pick up clear ones from your local dealership for around $40 or so and then use the "Dremel toolkit" to drill out the amber filling. Or you could just pull it out, that works too.

Is the dremel method impossible for the 99 side repeaters? Is this because there is no yellow inside and just a yellow shell?
Someone let me know because I just picked up a Dremel tool and wanna get clearing!

there's an excellent write up on this in AF (yes the dreaded AF for some of you), but there is no point in duplicating efforts right?

check it out at http://www.automotiveforums.com/vbulletin/t15897-1.html

yeah rob its impossible to clear the amber markers on the 99-00- the only thing you can do is buy the clear ones (@20 each) and either dremel the little yellow piece out or use some needle nose pliers

I like AF, you guys get cursed because you belive in the curse!!!:monster:

not only do you have to buy the clear markers and clear them yourselves, but you have to modify the housing to accept the 99 wiring harnes, I show you in that AF thread. Or you can just splice the new wiring harness into the existing wires...

have fun clearing them!

u have to but clear sidemarkers 4 a p10 correct? there is no way of clearing them urself?

have fun clearing !! me personally , going with the JDM look. I think clear lights are soooo last year. just my 2 cents :rolleyes: but if that's what you like, go for it !

Originally posted by CiViCtoG20
have fun clearing !! me personally , going with the JDM look. I think clear lights are soooo last year. just my 2 cents :rolleyes: but if that's what you like, go for it !

They may be soooo last year, but the fact is, clear lights make the car look sooo better. :D

so i can not clear out p10 sidemarkers????

so do the clear side markers from infinitipartsusa.com fit directly on a 99 p11? Do i have to make any modifications to the new light or to the wiring?

Originally posted by CiViCtoG20
have fun clearing !! me personally , going with the JDM look. I think clear lights are soooo last year. just my 2 cents :rolleyes: but if that's what you like, go for it !


Yeah I kinda agree with this....IM in no rush to get these lights cleared ...in fact I may never do at all. I kinda like the whole amber look right now...

I was thinking of painting the fender markers red to match the rear bumper---anyone try this at all????

Originally posted by AZ99G20t
so do the clear side markers from infinitipartsusa.com fit directly on a 99 p11? Do i have to make any modifications to the new light or to the wiring?

Yes, the bulb harness is different...I have a how to on My G20 site (www.customsteel.com/2001/MyG/) It shows you the modifications that you need to go in order for it to fit the 99'

BTW, Ive got my old clear set if you want them, already modified ($15 shipped). I replaced mine with R34 Skyline ones

Originally posted by MP2050
Yeah I kinda agree with this....IM in no rush to get these lights cleared ...in fact I may never do at all. I kinda like the whole amber look right now...

I was thinking of painting the fender markers red to match the rear bumper---anyone try this at all????


Same here, I already got a white G, I think the amber adds a lil color to the G...

Damn wish you would have said something before, i already bought them from infinitipartsusa. Oh well. What size amber bulbe should i get to replace the white bulb? Also where can i get them at?

any auto parts store...I think they are 198 bulbs....but dont quote me on that.

194A Bulb, you can get them at Advanced or Auto Zone, they will have em.

sweet thanks guys, now im just waiting on the actual clear repeaters to arrive. LOL i should have just went to infiniti of scottsdale and purchased them from there, but i didnt know they were the same company. Oh well, maybe ups came by my house while im at work. :(

Cleared my repeaters last night with just a pair of needle nose pliers. Took about 5 minutes to clear then i just used a file to make the modifications to the parts. Took about 30-40 mins. then did the install. Looks sweet. I may just buy some amber bulbs and put a coat of high temp silver paint on them so the amber doesnt show unless they are blinking. What do u guys think??

hey Yahnozha do you have any modded clear altima sidemarkers that you want to sell? Im lookin for some.

did my corners on friday, turned out pretty good, just used a screwdriver and needle nose pliers and broke out the amber. Does everyone leave their corners and sides clear, as in a clear bulbe, or do u guys put in amber ones? Im just wondering what the safest way is