aluminum gauge cluster cover!!!

[seneb]

ok, some of you might have seen this on the other forum. i now have a final price for you. anodized aluminum gauge cluster cover. don't ask for pictures, i don't have one because they have not been made yet. they will be like the carbon one i made, but aluminum. $30 shipped to your door. let me know what you all think. i am not going to do this unless there is interest. thanks!

[jmgladden]

don't ask for pictures, i don't have one because they have not been made yet

Happen to have a picture of the carbon fiber one? Thanks.

[seneb]

here is a pic of the carbon cover:

http://www.cardomain.com/member_pag...8406_2_full.jpg

[jmgladden]

Site is temporarily out-of-service until 3:30p PST. Guess I will try back later!

[jcl603]

seneb:

Is it hard to install? How would you install it? Open the gauge cluster and just stick it on? I'm interested if the install isn't too hard. BTW, I e.mailed you about the B&M Short Shifter group buy.

JCL603

[seneb]

install is a bit of a pain, but nothing super difficult. you have to take off some of the dash stuff, and remember what screws go where, but don't need any special tools. just a bit of patience.

btw - i just got a hold of a dismantler, and i can get the part i need to make a template for a p10!!! it's gonna cost me 20 bucks, but i guess i will do it for you guys if you buy some!! anybody know if they are different for the auto and manual? i know they are different for the p11, and am trying to get a hold of something for that.

[G20 SpoRt 2002]

Originally posted by seneb
install is a bit of a pain, but nothing super difficult. you have to take off some of the dash stuff, and remember what screws go where, but don't need any special tools. just a bit of patience.

btw - i just got a hold of a dismantler, and i can get the part i need to make a template for a p10!!! it's gonna cost me 20 bucks, but i guess i will do it for you guys if you buy some!! anybody know if they are different for the auto and manual? i know they are different for the p11, and am trying to get a hold of something for that.

The Carbon Fiber one that you made was for a P11 right?

[trbobrk]

Originally posted by seneb
anybody know if they are different for the auto and manual?
Which one do you have??? Redline is different on stick/auto but I don't know if they have shift indicator on auto guages.

I'll take a Brushed Aluminum P10 Manual Guage Cover.

[SR20Lover]

I'll take a brushed aluminum one for my P10. let me know when they are made. I believe the auto and stick are identical.

[seneb]

ok, just to clarify because i think we might be confused here... this is a cover that surrounds the gauges, it does not cover them. it sticks to the black plastic surrounding the gauges.

i will be picking up a gauge cluster from a junkyard today for the p10 (30 bucks) and will work on the design tonight. does anyone know if the gauge cluster changed at all during the production of the p10?

i'm going to try to get this done asap - i will keep you posted. =)

[jmgladden]

You are making the aluminum one for the P11 manual right? If so, I will take one! About how long of a wait are we looking at?

[NismoG20]

i think it changed from 91-93.5 and 94-96

i dont know if it is much of a difference but it is some

yeayea

[seneb]

jm- yeah, i currently have the design for the p11 manual. i don't know how long - probably a couple weeks.

ANYONE WITH A P10 - can you send me a pic of your gauge cluster and the year of your car, both manual and auto? thanks!

[jmgladden]

Sounds good seneb, keep me posted.

[seneb]

ok, i now have the designs for the p11 manual and p10 91-93 mostly done. here is a simulation of what i am aiming for them to look like. something to wet your appetite...

http://www.cardomain.com/member_pages/show_image.pl?image=188000-188999%2F188406_8_full.jpg

[g20jojit]

hey ! how about for the p10 93.5, I just check your design for the p10 and p11 They look cool .But i guess mine w/c is 93.5 has 4 small rectangular opening on each side.Please make one for this model

[moreace]

I can't picture it w/o it being on a car. Why are there holes for the blinkers and not arrows? Will u do carbon fiver? thanks

[jcl603]

Put me down for a 2000 P11 manual aluminum cover. Thanks! Just let me know when and who to pay and how much.

John

[g20jojit]

Hey! men i can't wait for the 93.5 face bezel the kind alike brushed aluminum .Please make one ASAP. Thanks.