PDA

View Full Version : JDM Primera Front Bumper

vi3tdragun4o5
Dec 18, 06, 04:05 PM
What mods do you need to do to fit a Primera bumper to a P10 (95')?

_mikey
ChickenWing
Dec 18, 06, 06:10 PM
(possibly) modifying or removing your front bumper support.
p10det
Dec 18, 06, 06:31 PM
if you get the front bumper with jdm suport it is a direct fit. i did have to notch the pinch weld at the bottom of the inside of frm so it bolted like stock. I have the autech jdm bumper
vi3tdragun4o5
Dec 18, 06, 06:34 PM
anyone have pics of any jdm bumpers mounted on the P10?

thanks

_mikey
p10det
Dec 18, 06, 06:42 PM
I can take a pic tomarrow if you would like. my bumper is not painted to match the car yet and car is at work with no trans in it. keep in mind you most likely will not find the same jdm bumper i have as their is only one other in the US to my knowladge
StangG20
Dec 18, 06, 08:52 PM
mine (EGT primera bumper)
http://i56.photobucket.com/albums/g162/sychostang/IMG_0605.jpg


mike's (p10det's- AUTECH Primera bumper)
http://i56.photobucket.com/albums/g162/sychostang/IMG_0712.jpg
http://i56.photobucket.com/albums/g162/sychostang/IMG_0713.jpg

as far as mounting it, i cant really be of too much help yet. mine is just kinda slapped on there. it is mostly just attached at the fender and resting on top of the usdm bumper support.
vi3tdragun4o5
Dec 18, 06, 09:03 PM
yeah..i kinda wanna do it like yours stangG20. i really dont want to cut into the support bar and void my insurance..just really wanna play it safe.

thanks for the reponse everyone and nice p10's =].

_mikey
jasezero
Dec 19, 06, 07:06 AM
EGT Primera Bumper FTW =)
Bennett @ esg
Dec 19, 06, 12:41 PM
without the jdm support it doesnt really fit at all.
StangG20
Dec 19, 06, 01:27 PM
good luck gettin the jdm support shipped for a reasonable amount
amek
Apr 01, 07, 09:23 PM
where can i find a jdm bumper..front and rears.. autech.. or just jdm. nothing r34 looking.. or ricey.