Hey Guys Just Started On My latest Project...Making a mesh Grill for the G...
all i have to do is sand it and put mesh in but i'm not sure exactly how install the mesh in the frame of the grill.... any Ideas?

Mesh Or No Mesh??

http://i49.photobucket.com/albums/f298/vtghost/100_6347.jpg

Use epoxy

yea that might work....

i will post pics later tonight! :naughty:

done yet?

Did you use epoxy?

done yet?

I wanna see, i wanna see :teeth:

I have to pick up the mesh tomorrow...hopefully will have it done by the end of the weekend..i still have to decide if i want it a solid color or if i want to give it a carbon fiber look...

heres how i do it when ever i do a P10 grille...
http://i83.photobucket.com/albums/j308/ndhernan/P10MeshPoints2.jpg

http://i83.photobucket.com/albums/j308/ndhernan/P10MeshPoints1.jpg

what i do is glue tabs to the back of the grille that pinch the mesh in place.
then i drille holes in the tabs and secure the mesh down with zip ties. the
ties arent visible at all from the front side of the grille.

http://i83.photobucket.com/albums/j308/ndhernan/IMG_0465.jpg

Whatever works...it pretty much comes down to how creative you are, and how clean you want it to look in the end.

heres how i do it when ever i do a P10 grille...
http://i83.photobucket.com/albums/j308/ndhernan/P10MeshPoints2.jpg

http://i83.photobucket.com/albums/j308/ndhernan/P10MeshPoints1.jpg

what i do is glue tabs to the back of the grille that pinch the mesh in place.
then i drille holes in the tabs and secure the mesh down with zip ties. the
ties arent visible at all from the front side of the grille.

http://i83.photobucket.com/albums/j308/ndhernan/IMG_0465.jpg


May I just take a moment to just say that you do excellent work.
Love the neat fits.:teeth:

May I just take a moment to just say that you do excellent work.
Love the neat fits.:teeth:

thanks man =)

I really Like that! i might have to try that!

Ok so i was thinking it might look good if i wrapped the grill in a carbon fiber vinyl..

what do you guys think? or should i keep it a solid color?

Thanks...

solid color unless you go cf hood trunk etc. if your gonna do it, do it. putting some cf just for the looks makes me think rice... go ahead and flame me if you actually like how cf looks.

yea i'm def not a ricer hahaha i was just thinking if it would look decent..just for shits and grins.....

but i might keep it a solid color or just do both and see what looks better since i have two grilles to play around with!

I used epoxy on mine, and then for extra support I used just a regular old glue gun. it's held up through several northeast winters no prob.

bump for pics