paul, hit me up if you have any questions. i dont know if you figured that tube out but i'll go out and look if you need me too
paul, hit me up if you have any questions. i dont know if you figured that tube out but i'll go out and look if you need me too
17" Maxxim Harpoon, GR-2 + Tein S, Spec stage 3 clutch, Zex 55-75hp dry shot, carbon fiber trunk, cf hood, cf mirror covers, cf b-pillars, Primera eGT bumpers + skirts, Eastbear grill, Catz hi/lo hids, euro tails, Carbing rstb, NissDataScan, 20% tints, g20T interior, Alpine CDA-9853, Alpine interiors, Directed 1500d amp, 2 - 10" Memphis audio subs, RF Punch 250.2
In the works: sr20ve + lsd tranny, ACT hdss, Fidanza
plug swap? spreading misinformation my friend!! he can do a plug swap if he wants to use the VE distributor tho!!!Originally Posted by marksr20
17" Maxxim Harpoon, GR-2 + Tein S, Spec stage 3 clutch, Zex 55-75hp dry shot, carbon fiber trunk, cf hood, cf mirror covers, cf b-pillars, Primera eGT bumpers + skirts, Eastbear grill, Catz hi/lo hids, euro tails, Carbing rstb, NissDataScan, 20% tints, g20T interior, Alpine CDA-9853, Alpine interiors, Directed 1500d amp, 2 - 10" Memphis audio subs, RF Punch 250.2
In the works: sr20ve + lsd tranny, ACT hdss, Fidanza
the hornet's ve is officially running. started her up today
correct ve dizzy to 99de wiring:
VVL-----------------------------p11
pin1-----------------------------pin1 CMPS ground
pin2-----------------------------pin2 CMPS +12v (small red-n-white wire)
pin3-----------------------------pin3 CMPS position
pin4-----------------------------pin4 CMPS reference
pin5-----------------------------pin7 Ignition check (coil -)
pin6-----------------------------pin8 Coil +12v (large red-n-white wire)
pin7-----------------------------pin5 Ground
pin8-----------------------------pin6 Ignition signal
Last edited by j-tek; Feb 26, 12 at 09:54 PM.
Congratz !
P11-144SW, VE, B15 LSD swap, DV9, SS/AS exhaust 2.5'-2.25'. AEM ATE B15-Rad B&A BC-Racing BF-Goodridge Bosch Brembo Bride-Brix-II Cusco D-1 DEI Dietz ES Fastbrakes Flexalite Greddy H&R Injen Innovate JWT Magnaflow NGK Nismo Nology Optima Progress Project-Kics Rays Sachs SCE Sparco SSAC Stillen Taylor Valvoline.
uk stuff is on
pics?
show then tell
azzz shot for naw
mmmm. dataz
Are you compensating for something with the D-ring on the Taco?
UK GT's gets its 1st cali shower
Looking nice... That's the bumper I wantzzz..
Get that stuff painted asap
P11-144SW, VE, B15 LSD swap, DV9, SS/AS exhaust 2.5'-2.25'. AEM ATE B15-Rad B&A BC-Racing BF-Goodridge Bosch Brembo Bride-Brix-II Cusco D-1 DEI Dietz ES Fastbrakes Flexalite Greddy H&R Injen Innovate JWT Magnaflow NGK Nismo Nology Optima Progress Project-Kics Rays Sachs SCE Sparco SSAC Stillen Taylor Valvoline.
roblop04............ get the tev instead
loek. ................. send me some $$$ so i can get things color matched
so it look's like the ve dizzy has a leaky o-ring.
So hawt.
EUDM>JDM>USDM
Yeah, how about you send me some $$$ and I´ll come over and do the paint job....roblop04............ get the tev instead
loek. ................. send me some $$$ so i can get things color matched
so it look's like the ve dizzy has a leaky o-ring.
Nice project, unique ride.
P11-144SW, VE, B15 LSD swap, DV9, SS/AS exhaust 2.5'-2.25'. AEM ATE B15-Rad B&A BC-Racing BF-Goodridge Bosch Brembo Bride-Brix-II Cusco D-1 DEI Dietz ES Fastbrakes Flexalite Greddy H&R Injen Innovate JWT Magnaflow NGK Nismo Nology Optima Progress Project-Kics Rays Sachs SCE Sparco SSAC Stillen Taylor Valvoline.
no, get the rest of the car painted to match the bumpers.
+1
[06-22, 05:46] javcrodgz Duck Fielown
[06-29, 04:31] Blackwater32 buck dillon
[07-26, 02:11] Kidcaffeine FUCK DILLON
[08-17, 03:57] OptimumSE-R CUCK FILLON DASSITY!!!
used her for field service duty to Lost Angeles
friday @ george's crib. not your typical socal weather
saturday @ dema's fortress. nice n sunny
grapevine
ve_licious
Last edited by j-tek; Apr 17, 12 at 10:29 PM.
Posting Permissions
Reply With Quote
