G20-Budo's P10-VE Panda "Po" History thread
G20.net is the premier Infiniti G20 Forum on the internet. Registered Users do not see the above ads.
Page 1 of 2 12 LastLast
Results 1 to 20 of 23

Thread: G20-Budo's P10-VE Panda "Po" History thread

  1. #1
    G20.net "part-time" Janitor G20-Budo's Avatar
    Join Date
    Mar 2002
    Location
    Chandler, AZ
    Posts
    5,046

    G20-Budo's P10-VE Panda "Po" History thread

    After looking around for some of Po's (My P10-VE Panda) threads, I realized they were all over the place. And it might make sense to create a single summary/history post that has links to all of the relevant thread regarding my car. So here we go:


    Header (Edge Racing, a.k.a. SSAC 2.5") and radiator install thread
    Ohlins suspension rebuild thread
    Brake upgrade time (P11 from, P@ BBK rear)
    SR20VE install thread
    Calum RT VVL activating ECU install thread
    Very cool ATI crank test fit (which I could have afforded it at the time and kept it) thread
    Found/fixed issue with my WB
    Some cosmetic pics of Po
    00-02' P11 LSD trans (with B15 FD) and Centerforce clutch install
    SR20VE 20V header & Snickers custom 2-1 secondary install
    Tecnocast wheels (with small repair)
    P10 Loco Poly Subframe Bushings Install

    I have a few other projects for Po in work right now. I will start threads for them and link them here in this history thread as time goes on.
    -Kyle has driven Snickers AT SPEED!
    96' G20(VE)
    Calum RT | Ohlins | Octotat | LoCo Performance | Addco | SuperPro | VRS | Custom Steel | DC Power Engineering | Mishimoto | Factory Upgrades (Motor | VC | CAMS | Header | Brakes | Others)

    My G20(VE) "Po" Build Thread


  2. Remove Advertisements
    G20.net
    Advertisements
     

  3. #2
    drunken master p10det's Avatar
    Join Date
    Dec 2003
    Location
    de
    Posts
    10,091
    Cool I will check them all out when I have time

  4. #3
    Suzie Kl0ne manjuice's Avatar
    Join Date
    Jul 2011
    Location
    AZG
    Posts
    2,120
    this is awesome kyle. liking all the hard work you put into the panda. save me some time searching for all this lol

  5. Remove Advertisements
    G20.net
    Advertisements
     

  6. #4
    G20.net "part-time" Janitor G20-Budo's Avatar
    Join Date
    Mar 2002
    Location
    Chandler, AZ
    Posts
    5,046
    Hey, I'm doing what I can to contribute to the forum here. And Marcus, your car is looking MUCH better then it did when I first met you. Keep up the good work!
    -Kyle has driven Snickers AT SPEED!
    96' G20(VE)
    Calum RT | Ohlins | Octotat | LoCo Performance | Addco | SuperPro | VRS | Custom Steel | DC Power Engineering | Mishimoto | Factory Upgrades (Motor | VC | CAMS | Header | Brakes | Others)

    My G20(VE) "Po" Build Thread


  7. #5
    Suzie Kl0ne manjuice's Avatar
    Join Date
    Jul 2011
    Location
    AZG
    Posts
    2,120
    Quote Originally Posted by G20-Budo View Post
    Hey, I'm doing what I can to contribute to the forum here. And Marcus, your car is looking MUCH better then it did when I first met you. Keep up the good work!
    thanks kyle! that means a lot coming from you

    keep a close eye kyle... i have a few things up my sleeve still

  8. #6
    G20 Guru
    Join Date
    Sep 2007
    Location
    socal
    Posts
    1,497
    very nice p10

  9. #7
    G20.net "part-time" Janitor G20-Budo's Avatar
    Join Date
    Mar 2002
    Location
    Chandler, AZ
    Posts
    5,046
    Quote Originally Posted by manteus View Post
    thanks kyle! that means a lot coming from you

    keep a close eye kyle... i have a few things up my sleeve still
    Sweet! Can't wait to see what's next on your car.

    Quote Originally Posted by blankman3 View Post
    very nice p10
    Thanks Joshua, it's a work in progress..
    -Kyle has driven Snickers AT SPEED!
    96' G20(VE)
    Calum RT | Ohlins | Octotat | LoCo Performance | Addco | SuperPro | VRS | Custom Steel | DC Power Engineering | Mishimoto | Factory Upgrades (Motor | VC | CAMS | Header | Brakes | Others)

    My G20(VE) "Po" Build Thread


  10. #8
    G20.net "part-time" Janitor G20-Budo's Avatar
    Join Date
    Mar 2002
    Location
    Chandler, AZ
    Posts
    5,046
    I just added the 20V header install thread at the top (which I updated tonight), and I updated the B15 transmission install thread tonight as well.
    -Kyle has driven Snickers AT SPEED!
    96' G20(VE)
    Calum RT | Ohlins | Octotat | LoCo Performance | Addco | SuperPro | VRS | Custom Steel | DC Power Engineering | Mishimoto | Factory Upgrades (Motor | VC | CAMS | Header | Brakes | Others)

    My G20(VE) "Po" Build Thread


  11. #9
    De La Code Blackwater32's Avatar
    Join Date
    Mar 2007
    Location
    p10Land,AZ....
    Posts
    6,941
    I vote Kyle as MOTM

    AZ 1/2 Race G20'S_TEAM NIZMO_AZG'Z


  12. #10
    G20.net "part-time" Janitor G20-Budo's Avatar
    Join Date
    Mar 2002
    Location
    Chandler, AZ
    Posts
    5,046
    Code, I vote you take Po for a drive and tell me what you think?
    -Kyle has driven Snickers AT SPEED!
    96' G20(VE)
    Calum RT | Ohlins | Octotat | LoCo Performance | Addco | SuperPro | VRS | Custom Steel | DC Power Engineering | Mishimoto | Factory Upgrades (Motor | VC | CAMS | Header | Brakes | Others)

    My G20(VE) "Po" Build Thread


  13. #11
    De La Code Blackwater32's Avatar
    Join Date
    Mar 2007
    Location
    p10Land,AZ....
    Posts
    6,941
    Im down

    AZ 1/2 Race G20'S_TEAM NIZMO_AZG'Z


  14. #12
    G20 Junior Member
    Join Date
    Oct 2012
    Location
    United States
    Posts
    99
    Very nice build. The car is how I pictured mine to be

  15. #13
    G20.net "part-time" Janitor G20-Budo's Avatar
    Join Date
    Mar 2002
    Location
    Chandler, AZ
    Posts
    5,046
    Quote Originally Posted by Blackwater32 View Post
    Im down
    When you free?

    Quote Originally Posted by exorcises View Post
    Very nice build. The car is how I pictured mine to be
    Thanks, the car is finally getting to where I want it. Pretty soon I'll actually be getting the bumper and side skirts painted and then only a few other things I'm wanting to do.
    -Kyle has driven Snickers AT SPEED!
    96' G20(VE)
    Calum RT | Ohlins | Octotat | LoCo Performance | Addco | SuperPro | VRS | Custom Steel | DC Power Engineering | Mishimoto | Factory Upgrades (Motor | VC | CAMS | Header | Brakes | Others)

    My G20(VE) "Po" Build Thread


  16. #14
    G20.net "part-time" Janitor G20-Budo's Avatar
    Join Date
    Mar 2002
    Location
    Chandler, AZ
    Posts
    5,046
    Well, figured I'd add more "history" to this thread.

    This past Saturday I took a road trip to Las Vegas with one of my local B13 SE-R VE buddies. My car did well, but I found I had an alignment issue and the car was running a bit hot. I installed a Mishimoto 12" slim fan, but didn't have time to get it hooked up until today. It's currently kicking on when the "high" signal is sent.

    I also got a few transmission switch connectors for my B15/P11 trans. I cut the old sensor wires off my old SE-R transmission to use so I can make patch cables to go from my P10 harness to the B15/P11 trans. I should have the patch cables finished and installed this week.

    Let's see, what else is on the agenda in the near future...
    • Adjust clutch (it engages a bit high for me)
    • Install the copper gasket (primary to secondary) that I ordered yesterday.
    • Install replacement WideBand O2 sensor and start tuning!
    • Start cleaning up the spare engine harness I picked up last week.
    • Install updated harness and COP/Nismotronic combination.
    • Fix my rear door (won't open, has a broken plastic clip in there)
    • Finally get back to working on HID's!
    -Kyle has driven Snickers AT SPEED!
    96' G20(VE)
    Calum RT | Ohlins | Octotat | LoCo Performance | Addco | SuperPro | VRS | Custom Steel | DC Power Engineering | Mishimoto | Factory Upgrades (Motor | VC | CAMS | Header | Brakes | Others)

    My G20(VE) "Po" Build Thread


  17. #15
    G20.net "part-time" Janitor G20-Budo's Avatar
    Join Date
    Mar 2002
    Location
    Chandler, AZ
    Posts
    5,046
    Oh, and I fixed my oil leak. I had replaced the front main seal a few weeks back (and it did need to be replaced or reseated) because I thought that was the main source of my oil leak. Turns out it was the chain tensioner gasket or o-ring. Not sure which one? I replaced them both, and pressure washed the motor. She's looking MUCH better under the hood now! I guess I'll take some pics and post them in the next few days.
    -Kyle has driven Snickers AT SPEED!
    96' G20(VE)
    Calum RT | Ohlins | Octotat | LoCo Performance | Addco | SuperPro | VRS | Custom Steel | DC Power Engineering | Mishimoto | Factory Upgrades (Motor | VC | CAMS | Header | Brakes | Others)

    My G20(VE) "Po" Build Thread


  18. #16
    G20 Guru
    Join Date
    Sep 2003
    Location
    SoCalGeezGeneral
    Posts
    1,469
    Hurry and post

  19. #17
    G20.net "part-time" Janitor G20-Budo's Avatar
    Join Date
    Mar 2002
    Location
    Chandler, AZ
    Posts
    5,046
    Per request (Frank)..

    Radiator hoses, old and new:


    Installed:


    B15 Trans in a P10 (switches all installed and hooked up).


    Connector for the B15/P11 trans switches:


    CS adjustable cams installed:

    -Kyle has driven Snickers AT SPEED!
    96' G20(VE)
    Calum RT | Ohlins | Octotat | LoCo Performance | Addco | SuperPro | VRS | Custom Steel | DC Power Engineering | Mishimoto | Factory Upgrades (Motor | VC | CAMS | Header | Brakes | Others)

    My G20(VE) "Po" Build Thread


  20. #18
    Suzie Kl0ne manjuice's Avatar
    Join Date
    Jul 2011
    Location
    AZG
    Posts
    2,120
    i vote you do cas and cop next and invite me over so i can see/help

  21. #19
    G20.net "part-time" Janitor G20-Budo's Avatar
    Join Date
    Mar 2002
    Location
    Chandler, AZ
    Posts
    5,046
    LOL!! I didn't post a pic of the spare wiring harness I picked up to do the COP setup, or the spare connectors I got from Wiring Specialties.. I will post those soon too,
    -Kyle has driven Snickers AT SPEED!
    96' G20(VE)
    Calum RT | Ohlins | Octotat | LoCo Performance | Addco | SuperPro | VRS | Custom Steel | DC Power Engineering | Mishimoto | Factory Upgrades (Motor | VC | CAMS | Header | Brakes | Others)

    My G20(VE) "Po" Build Thread


  22. #20
    Suzie Kl0ne manjuice's Avatar
    Join Date
    Jul 2011
    Location
    AZG
    Posts
    2,120
    Quote Originally Posted by G20-Budo View Post
    LOL!! I didn't post a pic of the spare wiring harness I picked up to do the COP setup, or the spare connectors I got from Wiring Specialties.. I will post those soon too,
    ill try to patientaly wait

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •