91-96 Infiniti G20 Suspension Modifications
Page 1 of 6 123456 LastLast
Results 1 to 20 of 116

Thread: 91-96 Infiniti G20 Suspension Modifications

  2. May 25, 04, 02:25 PM #1
    dsigns
    dsigns is offline
    G20 Guru dsigns's Avatar
    Join Date
    Nov 2002
    Location
    Stockton, Cali
    Posts
    12,149

    91-96 Infiniti G20 Suspension Modifications

    91-96 Infiniti G20 Suspension Modifications

    Bumpstops
    Koni Bumpstopswww.koni.com
    Coilover Kits
    Ground Control Coiloverswww.ground-control.com
    JIC Coilovers SA-1www.jic-magic.com
    JIC Coilovers SF-1www.jic-magic.com
    B+G Coilovers S3www.b-gsuspension.com
    Front Strut Bars
    JIC Front Strut Barwww.stillen.com
    JIC Carbon Front Strut Barwww.stillen.com
    Shocks
    Koni Special (Red) Shockswww.koni.com
    KYB AGX Shockswww.kyb.com
    KYB GR-2 Shockswww.kyb.com
    GAB Shockswww.stillen.com
    Springs
    B&G Springswww.b-gsuspension.com
    Eibach Pro-Kit Springshttp://www.eibach.com
    H&R Sport Springswww.hrsprings.com
    HKS SF5 Springswww.hksusa.com
    Intrax Springswww.intraxsuspension.com
    Tein S-Tech Springswww.tein.com
    Last edited by cavern; Mar 03, 07 at 11:19 AM.
    Reply With Quote Reply With Quote
  3. Sponsored Links Remove Advertisements
    G20.net
    Advertisements
     
  4. May 28, 04, 11:49 AM #2
    Scott
    Scott is offline
    Former G20 Addict Scott's Avatar
    Join Date
    Mar 2004
    Location
    Heyhio
    Posts
    3,429
    Is this going to become a sticky? I say it should!!!

    What about the D2 and Diahyama (sp?) coilovers?
    Reply With Quote Reply With Quote
  5. May 28, 04, 12:26 PM #3
    radicalG20
    radicalG20 is offline
    G20 Senior Member radicalG20's Avatar
    Join Date
    Mar 2002
    Location
    near Toledo, OH
    Posts
    611
    What about the stillen and cusco front strut bars and the carbing rear stb, along with jic lower arm bars and carbing lower arm bars? Also the stillen ft. camber plates? Just some things that should be added.
    Reply With Quote Reply With Quote
  6. May 28, 04, 12:37 PM #4
    radicalG20
    radicalG20 is offline
    G20 Senior Member radicalG20's Avatar
    Join Date
    Mar 2002
    Location
    near Toledo, OH
    Posts
    611
    Also I just remembered... the cusco lower arm bars and the impul front strut bar should also be added.
    Pic. of impul bar:


    Cusco also makes upper pillow-ball strut mounts for the rear of the p10.


    Nismo also has a full line of p10 bushings, most of which have to be purchased from a japanese importer.
    Last edited by mep; Jan 28, 06 at 08:31 AM. Reason: *correction on upper pillow-ball mount fitment(no fronts, rear only)
    Reply With Quote Reply With Quote
  7. Oct 06, 04, 01:19 AM #5
    octotat
    octotat is offline
    G20.net Vendor
    Join Date
    May 2002
    Location
    PHX AZ
    Posts
    855

    rear strut tower bar

    http://www.g20.net/forum/showthread....threadid=27276
    Reply With Quote Reply With Quote
  8. Apr 28, 05, 02:32 PM #6
    KwikyMAN
    KwikyMAN is offline
    North Star Fighter KwikyMAN's Avatar
    Join Date
    Nov 2004
    Location
    A loT of pLaces
    Posts
    3,216
    i heard rumors that early model altima strut bars will fit p10. or mebbe it was sentra....
    Reply With Quote Reply With Quote
  9. Aug 03, 05, 07:41 AM #7
    bobbykdy
    bobbykdy is offline
    G20 Junior Member bobbykdy's Avatar
    Join Date
    Jul 2004
    Location
    bristol
    Posts
    68
    can the control arms be removed and a coilover setup put into a p10??
    Reply With Quote Reply With Quote
  10. Aug 03, 05, 08:38 AM #8
    Nelson
    Nelson is offline
    Resident Lurker Nelson's Avatar
    Join Date
    Feb 2003
    Location
    Boise
    Posts
    2,405
    Quote Originally Posted by bobbykdy
    can the control arms be removed and a coilover setup put into a p10??
    A coilover setup can be put on a p10...there are numerous options above. As far as removing control arms, you can do it, but why would you want to? You can remove any part from a car, but that doesn't mean it's gonna run right afterward...
    Reply With Quote Reply With Quote
  11. Aug 03, 05, 02:40 PM #9
    KwikyMAN
    KwikyMAN is offline
    North Star Fighter KwikyMAN's Avatar
    Join Date
    Nov 2004
    Location
    A loT of pLaces
    Posts
    3,216
    Quote Originally Posted by Nelson
    You can remove any part from a car, but that doesn't mean it's gonna run right afterward...

    lawl
    Reply With Quote Reply With Quote
  12. Aug 04, 05, 06:55 AM #10
    bobbykdy
    bobbykdy is offline
    G20 Junior Member bobbykdy's Avatar
    Join Date
    Jul 2004
    Location
    bristol
    Posts
    68
    i wanted to put 19's on but there isnt enough space due to the control arms. i know it can be done on a p11 but i havent seen it done on a p10.
    Reply With Quote Reply With Quote
  13. Oct 13, 05, 12:44 AM #11
    G20-Budo
    G20-Budo is offline
    G20.net "part-time" Janitor G20-Budo's Avatar
    Join Date
    Mar 2002
    Location
    Chandler, AZ
    Posts
    4,634
    Something that was left out of the suspension options at the top was the Shigspeed setup. They're a custom built koni inserts (adjustable) with Eibach springs. They're not cheap, but very cool.
    -Kyle
    96' G20(VE)
    Calum RT | Innovate LC-1 | Ohlins | Octotat | LoCo Performance | Addco | SuperPro | VRS | AEM | Custom Steel | Factory Upgrades (Motor | VC | CAMS | Header | Brakes | Others)

    My Gallery
    My Feedback

    Reply With Quote Reply With Quote
  14. Oct 19, 05, 03:53 PM #12
    lukas
    lukas is offline
    G20 Junior Member
    Join Date
    Oct 2005
    Location
    warsaw.poland
    Posts
    54
    hi a wonder,is possible use rearshocks from g20 sedan to my p10 primera hatchback,this is european version,I,m interested KYB gasshocks or monroe sensatrack,thanks for your help
    Reply With Quote Reply With Quote
  15. Oct 19, 05, 04:42 PM #13
    G20-Budo
    G20-Budo is offline
    G20.net "part-time" Janitor G20-Budo's Avatar
    Join Date
    Mar 2002
    Location
    Chandler, AZ
    Posts
    4,634
    I personally have no idea lukas! Perhaps one of the other guys would know the answer to this?
    -Kyle
    96' G20(VE)
    Calum RT | Innovate LC-1 | Ohlins | Octotat | LoCo Performance | Addco | SuperPro | VRS | AEM | Custom Steel | Factory Upgrades (Motor | VC | CAMS | Header | Brakes | Others)

    My Gallery
    My Feedback

    Reply With Quote Reply With Quote
  16. Oct 19, 05, 05:53 PM #14
    G20Pimp
    G20Pimp is offline
    G20 Guru G20Pimp's Avatar
    Join Date
    Jun 2002
    Location
    Boulder, CO
    Posts
    1,301
    I believe they wont work, because the koni reds for the p10 hatches wont fit our sedans.
    Reply With Quote Reply With Quote
  17. Oct 20, 05, 04:39 PM #15
    lukas
    lukas is offline
    G20 Junior Member
    Join Date
    Oct 2005
    Location
    warsaw.poland
    Posts
    54
    there are only sedans g20,or maybe hatchbacks?my shocks are wery bad,and I must to do something,the best will be new shocks,but in Poland its hard to find KYB for the street performance
    ;-(
    Reply With Quote Reply With Quote
  18. Oct 20, 05, 04:44 PM #16
    trbobrk
    trbobrk is offline
    T3h Sexy Beast trbobrk's Avatar
    Join Date
    Mar 2002
    Location
    Seattle, WA USA
    Posts
    19,703
    G20s only came in sedans, fwd, and the sr20de motor.
    Reply With Quote Reply With Quote
  19. Dec 05, 05, 08:09 AM #17
    Kato
    Kato is offline
    G20 Member Kato's Avatar
    Join Date
    Nov 2005
    Location
    Dallas. TX
    Posts
    283
    Found these rear camber bolts on nopi.com
    http://www.nopionline.com/nopistore/...I%20G20%201994
    Reply With Quote Reply With Quote
  20. Dec 05, 05, 08:12 AM #18
    markbuts3
    markbuts3 is offline
    G20.net Staff
    Super Moderator     markbuts3's Avatar
    Join Date
    Jan 2004
    Location
    Derbyshire, UK
    Posts
    11,586
    Quote Originally Posted by Kato
    Found these rear camber bolts on nopi.com
    http://www.nopionline.com/nopistore/...I%20G20%201994
    Crash bolts
    Just call me Mark
    My Site



    Reply With Quote Reply With Quote
  21. Dec 21, 05, 09:34 PM #19
    buck a.k.a EARLY!!!!
    buck a.k.a EARLY!!!! is offline
    G20 Newbie buck a.k.a EARLY!!!!'s Avatar
    Join Date
    Oct 2005
    Location
    Queens new york
    Posts
    12
    wuts the website for the cusco upper pillow-ball strut mounts?
    Reply With Quote Reply With Quote
  22. Dec 22, 05, 02:52 AM #20
    markbuts3
    markbuts3 is offline
    G20.net Staff
    Super Moderator     markbuts3's Avatar
    Join Date
    Jan 2004
    Location
    Derbyshire, UK
    Posts
    11,586
    For the Cusco mounts you can get them from Japanparts.com

    http://www.japanparts.com/db/partsli...ddle=3&small=9
    Just call me Mark
    My Site



    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules