The other Colin laid down 323hp with his new cats.
13th page ownage! Still no pics or video from the last meet but it happened I assure you.
Begad! You must remember Cap'n, that blimey buccaneer sails a G35, not a G20. Our mate Charles would still lay claim as the fastest G20 out of our brethren of the coast. What say ye to that?
Just letting ye know the power needed to be the fastest G no matter how big the sails be on the ship, savvy?Originally posted by PrimeraRob3
Begad! You must remember Cap'n, that blimey buccaneer sails a G35, not a G20. Our mate Charles would still lay claim as the fastest G20 out of our brethren of the coast. What say ye to that?
Aarrrrrrrgggg. Aye surpose. Can be done mates!
P10 + Autech + Air Jacks + Cage + Z34 brakes + 20v + 625 inconel header +.......Some assembly required
___________
= Awesome
Okay, last weeks Mini Meet that "really" happened, was at Claim Jumper.
There claim to fame, is unusually large portions. In fact, check this sandwich out that Charles is trying to eat! It's called the Motherload, and for good reason. Yikes, it's taller than his drink! I had one too, but we only finished 1/2 of it!
Chad had some Jumbalaya that was served in a 13 gallon crock pot, Jason had a whole lamb, Colin (trbobrk) had a BBQ chicken pizza w/a salad, and Colin (cersoft) had some type of pot pie I believe.
It was fun! We then proceeded across the street to take some pictures and watch Colin drift his G35 and me honk my gay horn (video to follow soon). Oh yeah, we shared 2nd hand smoke w/a Civic owner too! Good times!
yeah, we need to see those vids. and friday we need to post the dyno vid... i'll get 324 WHP just to brag at colin! lol. j/k. hmm, this should be post 245..... I'm about to head off to bed. gotsta work tomorrow. Colin, get your axle in there! your car is lifted higher than mine i bet! Wed is the meet right?
P10 + Autech + Air Jacks + Cage + Z34 brakes + 20v + 625 inconel header +.......Some assembly required
___________
= Awesome
I'm down to meet on Wed. However, I don't know if Colin can make it. He may have to truck it. Low Green, signing off...
I'm sorry, I'll try again tomorrow to get the video stuffs. I'm also going to figure out what I'm going to do with my car as far as fixing the axle, and fixing the body.Originally posted by GT20iR
yeah, we need to see those vids. and friday we need to post the dyno vid... i'll get 324 WHP just to brag at colin! lol. j/k. hmm, this should be post 245..... I'm about to head off to bed. gotsta work tomorrow. Colin, get your axle in there! your car is lifted higher than mine i bet! Wed is the meet right?
I'll make it, I'll have to sell a kidney to buy a tank of gas for the thing but I'll manage.Originally posted by PrimeraRob3
I'm down to meet on Wed. However, I don't know if Colin can make it. He may have to truck it. Low Green, signing off...
sounds worse than my car. When i went to Bellingham I averaged 23.8mph there and back. and thats mostly freeway driving..... OUCH!
P10 + Autech + Air Jacks + Cage + Z34 brakes + 20v + 625 inconel header +.......Some assembly required
___________
= Awesome
Wassup biznatches, I'll try and get those videos up today ...
Also, my belt tensioner is about as tense as a stoned hippy .... my guy is talking to Stillen about getting me another one, the belt moves about an inch with just two finger pressure .... not good :-(
Colin
So, let’s shoot for a Wednesday meet this week as Thurs is bad for a few of us. As for location, I’m up for just about anything. Why don’t we try going north this time. We could do it in Bellevue! Anyone?
Oh, and Colin...where do you get your work done on the G35? I’m always looking for a new shop.
Azteca sounds good! Pollo Fundido! Where is it located? Isn’t it over near Coco’s by 405? Adios amigos...
There are 2, sort of. One is actually in redmond by a couple blocks in the overlake part of town on 148th. The other one is right off of 405 in bellevue between 4th and main on 112th. You can see it from the freeway.Originally posted by PrimeraRob3
Azteca sounds good! Pollo Fundido! Where is it located? Isn’t it over near Coco’s by 405? Adios amigos...
Bellevue sounds good for me, I'm up for anywhere, just let me know ...Originally posted by PrimeraRob3
So, let’s shoot for a Wednesday meet this week as Thurs is bad for a few of us. As for location, I’m up for just about anything. Why don’t we try going north this time. We could do it in Bellevue! Anyone?
Oh, and Colin...where do you get your work done on the G35? I’m always looking for a new shop.
I have been getting all my work done at Speedware Motorsports in Redmond, but they only have one good tech (Colin) so it can be hard to schedule. I am now thinking about using Carb Connections in Totem lake, they have a dyno and do a lot of turbo installs, good guys ....
Colin
How about the “old” one over by 405, off of 112th? I know that area well, and if anyone else comes from down this way, it’s easier to find. Plus, I’ll be coming from Bell Square anyway.
Say 7pm on Wednesday? We can mob through Bellevue at high rates of speed if it’s dry!
Hmm...okay. We can race for pink slips. I always wanted a big blue truck!