Alright guys, after many years of patiently waiting, pretty much not modding my vehicle at all, there is a VE sitting in my garage right now. I have to finish cleaning out the garage, pull the G20 in there and get started!
I'm sure to have questions, so I'll use this as my central thread for everything. I'm going to be pretty much on my own on this swap (central indiana is pretty devoid of SR20 enthusiasts - those that are here are not available) - so bear with me; Ben Davis helped me on everything else I have done in the past.
I'll have a couple pics up later... today has been much slower than I had anticipated. I was working by myself most of the day, and this being my first swap on my own, it's just slow going.
First major problem... the lower screw on the FPR is stripped out... any good ideas to get it out? I'm going to try some pliers here in a minute, but the top one was in there pretty good.
The axle nuts are NOT coming off, so I'm going to have to get an impact tomorrow... harbor freight closed 5 mins before we got there tonight, so I'm pretty much on hold for tonight.
Any suggestions on everything I can do w/ the axles still attached?