what'd you do to your G20 today?

[p10det]

i recently got my car trew inspecton and this past sat droped the nissmo 740cc injectors in and after a little toying over the weekend and on lunchj break to day she is makeing ass loads of power.
now i can be gine the finer tuneing .
im so hunngry for vlve trin upgrde and tommie cams

[Black95G20]

nice mike, have you done any suspension mods to that thing?

[Cesardrgn]

Drove to work and back. too cold to do anything...

[p10det]

i have 90% of ll supention mods but im sitting on stock springs. they have ben last on the list s djustable dampers and slock springs with up grdes give very good suspention travel.
I like the fact that i can beet guys in the uto x when they have coil overs nd tha same tire i have only good bit wider.
lets me know how good i can do with an equal set up.
the only 2 things i did not do and will not is the lower cantrol arm brace( for now exuast to big i have to fab one. and floor bar (I just think its a pointless peace added weight

[Black95G20]

i have 90% of ll supention mods but im sitting on stock springs. they have ben last on the list s djustable dampers and slock springs with up grdes give very good suspention travel.
I like the fact that i can beet guys in the uto x when they have coil overs nd tha same tire i have only good bit wider.
lets me know how good i can do with an equal set up.
the only 2 things i did not do and will not is the lower cantrol arm brace( for now exuast to big i have to fab one. and floor bar (I just think its a pointless peace added weight

alright i gotcha. yeah i agree on that floor bar, i dont think it's really necessary. I wanna get a sway bar and an LCAB and then i'll be done with suspension. . . .

[p10det]

what about filling in your suspention bushing and such? do you have upgraded uper links?

[Black95G20]

nah, my entire suspension setup is:

Teins
AGXs
Koni Bumpstops
FSTB
RSTB

I should do the bushings, I'm sure they need it after 280k miles.

[jr vq 30 de]

put a intake in today

[Straitup D]

nothing, maby ill wash her later

[SE-Rio]

I'm having my water pump, belts, and thermostat installed on my car as I type! I just let my boy take care of it because it was overheating everyday and I'm not going to have any time to do it myself this weekend.

Will report results later...

[Straitup D]

i rolled her to 190,000 as soon as i got to the house

[Kirru]

Fixed the CAI, adjusted the idle and drove like a mad man.... well i thought about that but i didnt do it.

getting side skirts soon.

havent decided what to do next

[Cesardrgn]

nothing. for the 2nd week is been under zero temp

[tova]

told her I would pull the alternator tomorrow depending on how freaking cold it is outside.

[Cesardrgn]

told her I would pull the alternator tomorrow depending on how freaking cold it is outside.

Sunny 43°F for you today.

[NismoSR-20]

Installed some 6000k HID's early this morning.

[Borist72]

For the 4th day in a row I started it 10 to 15 minutes before I took my wife to work. It takes a long time to warm up at -10 below F. Don't forget windchill....

[Cesardrgn]

^ Nice, Waking up early and jumping straight to the G. Good man...

[Borist72]

^ Nice, Waking up early and jumping straight to the G. Good man...

Start the car at 6:45, out the door around 7:00...
+1 for driving the G in the AM
-2 for temperature below 0 F

[tova]

Sunny 43°F for you today.

Well... right now its 28 out so it will wait for now.. going to the mall instead.