SOG (Southern Ontario G's) Weekly Meets - First 2010 Meet - July 18th - Post #2404 - Page 94
Page 94 of 176 FirstFirst ... 4484858687888990919293949596979899100101102103104144 ... LastLast
Results 1,861 to 1,880 of 3503

Thread: SOG (Southern Ontario G's) Weekly Meets - First 2010 Meet - July 18th - Post #2404

  1. #1861
    G20 Guru Loco's Avatar
    Join Date
    Nov 2003
    Location
    S. Ont., Canada
    Posts
    1,123
    Hey guys,

    Has anyone spoken to Lou lately?
    He was supposed to come to the Hammer on Saturday, but he never showed up, and I can't get ahold of him.

    I just want to make sure all is well.
    Please chime in if you have seen/spoken to him this week.

    Thanks,
    K.
    2001 G20t, 5 Speed, Titanium, 17" 5Zigen FN01R-C, Tein/GR-2 combo, Koni bumpstops, SPW FSTB, MEP Mounts, Octotat RSTB, Zex Wet Kit 75shot, Purge kit, Bottle Heater, Exedy Stage 1, Fidanza 8.5lb F/W, Hotshot CAI, HS gen V header, Remus Exhaust, Walbro 255, Wilwood BABK, Cosmo SS, Dual A pillar pod, TWM Knob, Custom Ground Wires, Nismo AFPR, JDM Duals. Much more to come......
    Thanks G20.net, SR20forum and SOG's

  2. Remove Advertisements
    G20.net
    Advertisements
     

  3. #1862
    G20 Senior Member pr4mnceG20's Avatar
    Join Date
    Jun 2004
    Location
    Toronto
    Posts
    687
    Quote Originally Posted by Loco View Post
    Hey guys,

    Has anyone spoken to Lou lately?
    He was supposed to come to the Hammer on Saturday, but he never showed up, and I can't get ahold of him.

    I just want to make sure all is well.
    Please chime in if you have seen/spoken to him this week.

    Thanks,
    K.
    Ya.. I spoke to him yesterday...he called me here at work and said that he was joining the cast of The Village People on Broadway...something about how he'd make an awesome Indian Chief and how great he looks in assless chaps?!... hahahaha... kidding... he said fell asleep Saturday night when he was suppose to come down and meet up with you at the Hammer and is sorry (i'd fall asleep too if I ate 2 double whopper combos...hehehe... jk)....he said he's working in the west end this week....give his cell a call after 6pm....

  4. #1863
    G20 Guru Loco's Avatar
    Join Date
    Nov 2003
    Location
    S. Ont., Canada
    Posts
    1,123
    Quote Originally Posted by pr4mnceG20 View Post
    Ya.. I spoke to him yesterday...he called me here at work and said that he was joining the cast of The Village People on Broadway...something about how he'd make an awesome Indian Chief and how great he looks in assless chaps?!... hahahaha... kidding... he said fell asleep Saturday night when he was suppose to come down and meet up with you at the Hammer and is sorry (i'd fall asleep too if I ate 2 double whopper combos...hehehe... jk)....he said he's working in the west end this week....give his cell a call after 6pm....
    Anyone who eats 2 double whopper combos would not look good in assless chaps! So he's lying about 1 of those 2 statements (looking good in chaps or eating 2 whopper combos). Im leaning toward him lying about the chaps.

    Thanks for the update Joe. I'll give him a shout later.
    K.
    Last edited by Loco; Nov 04, 09 at 12:04 PM.
    2001 G20t, 5 Speed, Titanium, 17" 5Zigen FN01R-C, Tein/GR-2 combo, Koni bumpstops, SPW FSTB, MEP Mounts, Octotat RSTB, Zex Wet Kit 75shot, Purge kit, Bottle Heater, Exedy Stage 1, Fidanza 8.5lb F/W, Hotshot CAI, HS gen V header, Remus Exhaust, Walbro 255, Wilwood BABK, Cosmo SS, Dual A pillar pod, TWM Knob, Custom Ground Wires, Nismo AFPR, JDM Duals. Much more to come......
    Thanks G20.net, SR20forum and SOG's

  5. #1864
    G20 Senior Member pr4mnceG20's Avatar
    Join Date
    Jun 2004
    Location
    Toronto
    Posts
    687
    Quote Originally Posted by Loco View Post
    Anyone who eats 2 double whopper combos would not look good in assless chaps! So he's lying about 1 of those 2 statements. Im leaning toward the chaps.

    Thanks for the update Joe. I'll give him a shout later.
    K.
    hahaha... so you agree with the first statement that he'll make a good Indian Chief....lol...

    I'm trying to set a time and day to meet up with him too so I can get my driver side motor mount from him that he picked for me...if you do get a hold of him before I do, can you tell him to give me a shout at home after 8pm..

    Thanks,
    Joe
    Last edited by pr4mnceG20; Nov 04, 09 at 02:39 PM.

  6. #1865
    G20 Guru Loco's Avatar
    Join Date
    Nov 2003
    Location
    S. Ont., Canada
    Posts
    1,123
    Quote Originally Posted by pr4mnceG20 View Post
    hahaha... so you agree with the first statement that he'll make a good Indian Chief....lol
    Edited

    If I get ahold of him, I'll tell him to call you!
    2001 G20t, 5 Speed, Titanium, 17" 5Zigen FN01R-C, Tein/GR-2 combo, Koni bumpstops, SPW FSTB, MEP Mounts, Octotat RSTB, Zex Wet Kit 75shot, Purge kit, Bottle Heater, Exedy Stage 1, Fidanza 8.5lb F/W, Hotshot CAI, HS gen V header, Remus Exhaust, Walbro 255, Wilwood BABK, Cosmo SS, Dual A pillar pod, TWM Knob, Custom Ground Wires, Nismo AFPR, JDM Duals. Much more to come......
    Thanks G20.net, SR20forum and SOG's

  7. #1866
    G20.net Staff
    Super Moderator
    slimlou's Avatar
    Join Date
    Sep 2004
    Location
    Toronto, ON
    Posts
    6,075
    I've been trying to get hold of the idiot too, but everytime I try calling him from my cell, it goes straight to voicemail...

  8. #1867
    G20 Guru Loco's Avatar
    Join Date
    Nov 2003
    Location
    S. Ont., Canada
    Posts
    1,123
    Hey Lou stop lying, everybody knows you have a good hold of yourself................=D
    2001 G20t, 5 Speed, Titanium, 17" 5Zigen FN01R-C, Tein/GR-2 combo, Koni bumpstops, SPW FSTB, MEP Mounts, Octotat RSTB, Zex Wet Kit 75shot, Purge kit, Bottle Heater, Exedy Stage 1, Fidanza 8.5lb F/W, Hotshot CAI, HS gen V header, Remus Exhaust, Walbro 255, Wilwood BABK, Cosmo SS, Dual A pillar pod, TWM Knob, Custom Ground Wires, Nismo AFPR, JDM Duals. Much more to come......
    Thanks G20.net, SR20forum and SOG's

  9. #1868
    G20.net Staff
    Super Moderator
    slimlou's Avatar
    Join Date
    Sep 2004
    Location
    Toronto, ON
    Posts
    6,075
    Here's something (that everyone who knows me) hasn't heard me say on a long time, I've been working! Working sucks! lol

  10. #1869
    G20 Senior Member pr4mnceG20's Avatar
    Join Date
    Jun 2004
    Location
    Toronto
    Posts
    687
    Congrats on getting back into the grind Lou!!...now get back to work!!!... hahahaha

  11. #1870
    G20 Junior Member
    Join Date
    Nov 2007
    Location
    Toronto
    Posts
    64
    Hey guys... so i got a story for yall and i also need your help.

    The other day I was at my friends house sitting down doing an assignment. Then me and my friends hear smashing noises outside so we run outside and saw that my car and my friends car had their windows smashed (both cars, windshield + backwindow + passenger door window)

    Now this is a house very near my university and it has a whole in the fence in the backyard that students use to go through straight to the campus instead of walking around a long distance. Sometimes ppl just randomly park at my friends house without asking permission or anything. That day there was a car parked there without permission so they decided to take out the air from one of the tires to teach the guy a lesson or have him talk to them so they cud inform him not to park there again.

    Im guessing this guy took his car, came back or called his friends and smashed the windows of the remaining cars in the parking lot. We managed to see sort of what kind of car it was, and some of the numbers on the plates (not fully) and then called the cops. We also know the guy who parked there without permission and where he lives, but still we dont have full proof. Cops went there and found a similar car as to what we described (the car that they used to come and smash the windows with) without any plates and unregistered. Yet still the cops didnt do anything yet.

    To make matters worse, i didnt have glass coverage on my car, so therefore im stuck fixing this myself.

    Now the car is stuck in Oshawa, parked safely at my other friends garage. Im in desperate need of the parts, or a good glass shop in Oshawa thats not gona rip me off. So far the cheapest price ive gotten (with some new and some used parts) is $820 installed and everything. Oh and you don't remember I own a 1995 240sx.

    Thanks guys, at this point im ready to sell my 240sx and buy a G20 (which i can also drive in the winter). So please let me know about all the options i have and give me some advice, im really stuck here lol.

  12. #1871
    G20 Junkee GTA_G20's Avatar
    Join Date
    Mar 2002
    Location
    Ajax,Ontario,Can
    Posts
    2,339

    WTB ASAP - SR20 Alternator in the GTA

    Rad is cracked and Ive been spewing fluid and steam onto my alt and yesterday she crapped out. Rather not wait till the morning to deal with Tiger Jap. If anyone has one up for grabs let me know and I will be massaging my SR20 tonight with a new rad

    BTW anyone needing a RAD Lou's hook up is bannannas! 85$+tax for a brand new not remann'd rad!

  13. #1872
    G20 Guru TINOG20's Avatar
    Join Date
    Nov 2006
    Location
    Canada
    Posts
    1,317
    Avenir Engine Swap Finally Complete!!!
    Last edited by TINOG20; Nov 13, 09 at 09:51 AM. Reason: Lou is gay :)

  14. #1873
    G20.net Staff
    Super Moderator
    slimlou's Avatar
    Join Date
    Sep 2004
    Location
    Toronto, ON
    Posts
    6,075
    ^^^???^^^ What do you mean 'alive'? Doesn't look it to me! I don't see/hear movement/sound. All I see is a still pic. For all we know, the engine is dead.

  15. #1874
    'Luke' Loek's Avatar
    Join Date
    Oct 2002
    Location
    Venezuela
    Posts
    5,217
    Well done, now give it some breathing/cooling air. It will choke in it's own heat without a scoop or something in that hood.
    P11-144SW, VE, B15 LSD swap, DV9, SS/AS exhaust 2.5'-2.25'. AEM ATE B15-Rad B&A BC-Racing BF-Goodridge Bosch Brembo Bride-Brix-II Cusco D-1 DEI Dietz ES Fastbrakes Flexalite Greddy H&R Injen Innovate JWT Magnaflow NGK Nismo Nology Optima Progress Project-Kics Rays Sachs SCE Sparco SSAC Stillen Taylor Valvoline.

  16. #1875
    G20 Member
    Join Date
    Sep 2007
    Location
    GTA, Ontario
    Posts
    216
    seems like a decent night tonight, is there going to be a meet ?, actually free tonight, i can meet you guys out closer to this side ? since i'm getting home late tonight and want to eat before heading out but don't wanna head all the way across ...

  17. #1876
    G20 Guru TINOG20's Avatar
    Join Date
    Nov 2006
    Location
    Canada
    Posts
    1,317
    Quote Originally Posted by Loek View Post
    Well done, now give it some breathing/cooling air. It will choke in it's own heat without a scoop or something in that hood.
    Hey Loek, yes future project will be front mount intercooler, I just couldn't afford it right now. As for hood scoop, in my opinion a too much for a G20 maybe in future I can see to have a slit for air to pass through got my licence plates, insurance now the car is getting some body work done, hopefully get euro tails put in next year, impul style grille and maybe in future some euro duals

  18. #1877
    G20 Guru TINOG20's Avatar
    Join Date
    Nov 2006
    Location
    Canada
    Posts
    1,317
    Hey everyone not sure where everyone is lately. Lot of members in Toronto are selling their G's and seems that our community is getting smaller. I may have to start my own little Gino group since I have 3 G's and have 2 of my girlfriends drive the other 2 to get another group started lol I know winter is approaching and not many have a place or space to host any more meets except Luke who has a nice backyard Hopefully in the next week or so I will officially have my car on the road after its certified and e tested. Now I'm in the process of finding this so called hotrod status report which I feel the shop who did the swap should provide. How can I find this info and how's everyone doing?
    Last edited by TINOG20; Nov 22, 09 at 06:53 PM.

  19. #1878
    G20 Senior Member pr4mnceG20's Avatar
    Join Date
    Jun 2004
    Location
    Toronto
    Posts
    687
    Hey T... I just PM'd you about the rotors place you asked me about... and ya I'm one of those peeps selling his G20...but that won't happen until after the new year...so I'll still have the car for another month or so...

  20. #1879
    G20.net Staff
    Super Moderator
    slimlou's Avatar
    Join Date
    Sep 2004
    Location
    Toronto, ON
    Posts
    6,075
    Hey guys, sorry for the delay in getting this going. I've been speaking to a couple of members recently, and it looks like I will be placing an order for Upper Links sooner than later. So, to help save some $$ on combined s/h, I would do a mini GB for SOG members. Pricing looks like it'll be $85-90cdn for the pair shipped (inc duty/taxes) in our hands. IIRC, Joe or another member recently paid $75cdn+taxes (free s/h) for just one upper link. And yes, these upper links will work for both P10/P11's. So, below is a list of local members who've I've spoken to & are interested. Unlike my past delays, I'd like to get this going sooner than later. I'd like to get these ordered in the next week to 10 days or 10 pairs? There might be a weight limit to get them at this price ( can't exceed a max pkg weight. Then again, i can always ask to have them split the order up not to exceed the max single pkg weight) So here's the list:

    1. slimlou - 1 pair
    2. jkho - 1 pair
    3. Jetty - 1 pair
    4. GTA_G20 - 1 pair
    5. 20G2009 - 1 pair
    6. TINOG20 - 2 pairs
    7.
    8.
    9.
    10.
    Last edited by slimlou; Nov 23, 09 at 11:42 AM. Reason: Updated list

  21. #1880
    G20 Member
    Join Date
    Sep 2007
    Location
    GTA, Ontario
    Posts
    216
    how do you tell if u're links are worn ? is there a standardized test ?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •