Infiniti G20 Nissan Primera Forum banner
speaker
1-12 of 12 Results
  1. Power Acoustik NB1 Tweeters_Installed on P11 A-Pillar

    These pictures show how I snapped the tweeters into the A-Pillar trim panaels. They were a nice tight fit. Actually, the excess flash left over from the ultrasonic welding of the tweter grill to the A-Pillar was perfect. The flashing acted as tabs to the slots around the outer egde of the tweeter
  2. Power Acoustik NB1 Tweeters_Installed on P11 A-Pillar

    These pictures show how I snapped the tweeters into the A-Pillar trim panaels. They were a nice tight fit. Actually, the excess flash left over from the ultrasonic welding of the tweter grill to the A-Pillar was perfect. The flashing acted as tabs to the slots around the outer egde of the tweeter
  3. Power Acoustik NB1 Tweeters_Installed on P11 A-Pillar

    These pictures show how I snapped the tweeters into the A-Pillar trim panaels. They were a nice tight fit. Actually, the excess flash left over from the ultrasonic welding of the tweter grill to the A-Pillar was perfect. The flashing acted as tabs to the slots around the outer egde of the tweeter
  4. Power Acoustik NB1 Tweeters_Installed on P11 A-Pillar

    These pictures show how I snapped the tweeters into the A-Pillar trim panaels. They were a nice tight fit. Actually, the excess flash left over from the ultrasonic welding of the tweter grill to the A-Pillar was perfect. The flashing acted as tabs to the slots around the outer egde of the tweeter
  5. Power Acoustik NB1 Tweeters_Installed on P11 A-Pillar

    These pictures show how I snapped the tweeters into the A-Pillar trim panaels. They were a nice tight fit. Actually, the excess flash left over from the ultrasonic welding of the tweter grill to the A-Pillar was perfect. The flashing acted as tabs to the slots around the outer egde of the tweeter
  6. Power Acoustik NB1 Tweeters_Installed on P11 A-Pillar

    These pictures show how I snapped the tweeters into the A-Pillar trim panaels. They were a nice tight fit. Actually, the excess flash left over from the ultrasonic welding of the tweter grill to the A-Pillar was perfect. The flashing acted as tabs to the slots around the outer egde of the tweeter
  7. Power Acoustik NB1 Tweeters_Installed on P11 A-Pillar

    These pictures show how I snapped the tweeters into the A-Pillar trim panaels. They were a nice tight fit. Actually, the excess flash left over from the ultrasonic welding of the tweter grill to the A-Pillar was perfect. The flashing acted as tabs to the slots around the outer egde of the tweeter
  8. Power Acoustik NB1 Tweeters_Installed on P11 A-Pillar

    These pictures show how I snapped the tweeters into the A-Pillar trim panaels. They were a nice tight fit. Actually, the excess flash left over from the ultrasonic welding of the tweter grill to the A-Pillar was perfect. The flashing acted as tabs to the slots around the outer egde of the tweeter
1-12 of 12 Results
Top