stretch them tires bro
17x9 wheels
I'm looking to put 17x9 +25 offset on my p10. Has anyone run wheels this size? I want to know what I would need to do to make them fit.
1 - 20 of 23 Posts
I was reading other threads and they say this anything wider than 8 won't fit. So what is the ideal size and offset with a little poke?
Lots of pulling and rolling of the fenders. That's a bit wide.I was reading other threads and they say this anything wider than 8 won't fit. So what is the ideal size and offset with a little poke?
You'll need to roll the fenders flat, stretch either a 205 or 215/40 on them and you'll be good with enough drop. Might need to slightly pull the fenders.s
So this size is doable? I don't want to buy them if they cant fit with little bit of fender work.
What wheels? Im guessing xxr's.
What about camber. I really don't want to have to run too negative of a camber.
Nah ccw replicasWhat wheels? Im guessing xxr's.
Don't do it. Sounds like you're not committed.
Yes. But a diff color. I want something that pokes out a bit would 16x8 +0 work?these the wheels, 17's are too big for p10 though.. jmho
![]()
16s with 0 offset will give you too much poke. Try to get 16 +15 or +20 would be good
Btw.. I love those wheels. Get em and be the 1st here
Btw.. I love those wheels. Get em and be the 1st here
Yea I'm looking at either full machined or gloss black with machined lip.16s with 0 offset will give you too much poke. Try to get 16 +15 or +20 would be good
Btw.. I love those wheels. Get em and be the 1st here
are those the STR 520s? I was just looking at those. Let me know what size you get and how they fit
are you on springs or coils or stock height... makes a big diff on want you can run
Yes. Str 520. And will doare those the STR 520s? I was just looking at those. Let me know what size you get and how they fit
Stock height right now. Going with coils later.are you on springs or coils or stock height... makes a big diff on want you can run
Doubt anything 9" wide wide will fit with stock suspension, unless you run some larger spacers to keep the wheel/tire from rubbing on the strut. Then you're gonna need to roll fenders for sure. I had to run 5mm spacers and roll fenders just to fit 7.5" wide wheels, due to the meatier tires I have on them. Coils will help out since they eat up less wheel-well area. Camber will always be an issue on G20s, since there's not a simple camber adjustment screw option for our fronts like most vehicles have available to them.
17x9 +25 on a P10? nope. if all you want to do is suspension work to fit some wheels over unmolested fenders..then 17x7 +45 is for you:]
1 - 20 of 23 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Infiniti G20 Nissan Primera Forum
A forum community dedicated to Infiniti G20 and Nissan Primera owners and enthusiasts. Come join the discussion about performance, modifications, classifieds, troubleshooting, maintenance, and more!
Full Forum Listing
Explore Our Forums
