[SR20 Inside]

I will be posting up items when I can. In the mean time you can check out the parts I put up on eBay;
Items for sale by drake50 | eBay


I'm getting old, have my FX50 and Leaf for now so I figure it's time to put her to rest :/.
Threw a rod in 'ole Goldilox the other night, no idea how or why but I think it's time to part ways. I have quite a bit of stuff.
- Car has approx. 126,000 miles on the chassis (1996, gold, black leather interior, touring package)

• Just replaced a shit ton of parts on it a couple years back, never drive the car so these parts only have MAYBE a few thousand miles on them..
• KYB AGX struts
• Tein S-tech springs
• Rear arms have all new SuperPro bushings installed
• Front lower arms have SuperPro/Whiteline bushings
• Upper arms are some newer aftermarket crap
• Addco rear sway bar
• TopSpeed front strut tower bar
• Carbing aluminum rear strut tower bar
• SR20VE N1 cams (need to inspect condition still)
• BC springs/retainers (need to inspect condition still)
• OBX header
• stock catalytic converter
• stainless steel test pipe
• 3" magnaflow catback ( probably have to do locals only on this)
• Cusco HP10T specific oil catch can new
• Carbing aluminum site shield, radiator cover plate doohickey (pretty sure it's new in box)
• Reman calipers/new rotors/pads/stoptech stainless brake lines
• VOLK TE37 15x7" wheels
• Kics Caliber24 Lug Nuts
• Some sort of EDM dual headlights
• New OEM A/C lines
• Basically new aftermarket A/C dryer and condenser
• JWT ECM with VE mapping
• more to come once I can get into the garage ( I think I have a ton of shit not listed )

 

[Dane]

So sad.

 

[sweetkoitoh]

Pm sent

 

[Nelson]

PM also sent.

 

[SR20 Inside]

Hey guys, sorry lifes been busy, I haven't logged into the site forever.

I have a shit ton of parts I'll try to get listed but in the mean time I am going to be listing items up on ebay you can check out here; Items for sale by drake50 | eBay

Currently have cusco catch can and carbing cooling plate listed up.

Talk to you soon.

 

[SR20 Inside]

 

[SR20 Inside]

Thought the site would resize the pics ahha

 

[SR20 Inside]

Have a Tomei oil filler cap, Kics Caliber24 Hexagonal lug nuts, Greddy water temp inlie coolant hose adapter thingy and some other things I'l try to get pics up of soon.

 

[Dane]

I hate eBay.

 

[SR20 Inside]

I hate eBay.

Like in a good way or bad way ahah. Can't tell if you're being sarcastic or not

IDK why I keep listing on there, they keep taking a huge cut plus the goddamn taxes.

 

[SR20 Inside]

 

[SR20 Inside]

 

[SR20 Inside]

My OG filled mounts with 90A urethane, super stiff if anyone needs something for a racecar ahah.
I daily drove these for a while, wasn't bad in my early 20's but if you want something comfy it's a no go.

 

[Dane]

Stahp

 

[Dane]

Just throw them all in a box.

 

[Nelson]

IDK why I keep listing on there, they keep taking a huge cut plus the goddamn taxes.

I know! Should just sell stuff on here via PM when people contact you. Then Dane couldn’t snake my stuff! 😁

What are the little nuts and inserts in the little baggie? Are those trunk inserts for cargo net and/or storage plate?

 

[SR20 Inside]

I know! Should just sell stuff on here via PM when people contact you. Then Dane couldn’t snake my stuff! 😁

What are the little nuts and inserts in the little baggie? Are those trunk inserts for cargo net and/or storage plate?

Bad pic, its the mounting hardware for the rear stb

 

[trbobrk]

What are the little nuts and inserts in the little baggie?

Deeznuts?

 

[SR20 Inside]

 

[SR20 Inside]

Thought I mentioned I have the following;
Fidanza flywheel looks to be in good shape but also have a replacement friction ring also
B15 disc/JWT pressure plate? (still in trans)
SR16VE lightweight flywheel (still in trans)
EDM headlights think I have a couple sets in the garage
Numerous HID bulbs and ballasts I was going to attempt to retrofit
Sr20ve stock camshafts / springs / retainers
N60 MAF
N62 MAF
Heated seat conversion kit
Process West 08 WRX TMIC x 2 - was going to retrofit at one point as a front mount or something never did, one core has a pin hole in it in great shape otherwise and the other has been dented to shit but I think it still holds pressue