Infiniti G20 Nissan Primera Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
1,027 Posts
1) Pull your engine

2) Send the block to JWT to have them bore it 1mm over

3) Get 300ZX pistons and have the domes milled off

4) Get the pistons coated with Swain Tech's Gold Coat on the domes and Poly Moly on the skirts.

5) Narrow the small end of the rods by 0.010" to fit the 300ZX pistons

6) Get UR low mass pulleys

7) Get a JWT aluminum flywheel and pressure plate

8) Balance the rotating and reciprocating mass to within less than 0.5 grams

9) Have JWT install DET piston coolers

10) Have DPR make your cylinder head a Stage VI head

11) Get JWT valve springs and C2/C3 cams and cam gears

12) Get the latest generation Hotshot header

13) Get a Hotshot CAI

14) Get Nissan 370cc injectors

15) Have JWT program your ECU with the 11:1 CR program

16) Get Koni dampers and GC coilovers

17) Get the Stillen swaybar for the rear

18) Get the Wings West front spoiler lip

19) Get the GReddy exhaust

20) Get some 17" Volk wheels with Yokohama Y032 tyres

21) Get the Stillen Brembo brakes

22) Get some Recaro seats (covered in optional leather of course)

Just for starters.
 

·
Registered
Joined
·
1,027 Posts
BTW, please do not abuse the "report this post" function.

It should not be used to get moderators to read and respond to your post. I'm not in charge of the forum, but if I get another report of your own post to troll for responses, I will lock the thread down.
 

·
Premium Member
Joined
·
11,383 Posts
Geo said:
It should not be used to get moderators to read and respond to your post. I'm not in charge of the forum, but if I get another report of your own post to troll for responses, I will lock the thread down.
And the King speaketh.....

Oh yeah you forgot one thing...

23) Reinstall your *slightly* modded engine...

But really, read this...
http://www.se-r.net/car_info/engine_performance_tuning.html
great info for newbies....
 

·
G20.net Founder
Joined
·
2,110 Posts
Geo said:
1) Pull your engine

2) Send the block to JWT to have them bore it 1mm over

...

21) Get the Stillen Brembo brakes

22) Get some Recaro seats (covered in optional leather of course)

Just for starters.
So what's the rest? Oh btw can you get me contact numbers, part numbers and prices for everything you just listed? Also can you call around for availablity for me? :cheeky: :cheeky: :cheeky: :cheeky: :cheeky: :cheeky:
 

·
Registered
Joined
·
5,266 Posts
Yahnozha said:

And the King speaketh.....

:p Amen.From this forth, may his words of wisdom be immortalized for all G20 and sr20de members to heed and obey.
All newbies will be beheaded for their ignorance!!!!!:p
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top