Infiniti G20 Nissan Primera Forum banner

5 Speed LSD conversion parts

173 Views 3 Replies 3 Participants Last post by  Y2KG20
We have decided to part out the 1999 G20T 5 speed. It had too much body damage to save. Good news for someone that wants to go 5 Speed LSD!

Complete transmission hard parts swap
1999 5 Speed LSD G20T - 175,xxx miles. Did a burnout in the alley to make sure it still lights up both sides :) Shifts smooth all gears, no pop outs
Axle carrier bracket
Both axles
Shift linkage rods
Shifter, Boot, Console plate, Shift knob - all stock and black in color
Flywheel and clutch (was told that it was just replaced, won't know till I pull it)
Brake/Clutch pedal set
Hydraulics - Master/Slave all hardlines

Everything else on the car is spoken for on another project. Also don't ask me to split it up.

$1000 located in Springfield, MO 65802
1 - 4 of 4 Posts
We have decided to part out the 1999 G20T 5 speed. It had too much body damage to save. Good news for someone that wants to go 5 Speed LSD!

Complete transmission hard parts swap
1999 5 Speed LSD G20T - 175,xxx miles. Did a burnout in the alley to make sure it still lights up both sides :) Shifts smooth all gears, no pop outs
Axle carrier bracket
Both axles
Shift linkage rods
Shifter, Boot, Console plate, Shift knob - all stock and black in color
Flywheel and clutch (was told that it was just replaced, won't know till I pull it)
Brake/Clutch pedal set
Hydraulics - Master/Slave all hardlines

Everything else on the car is spoken for on another project. Also don't ask me to split it up.

$1000 located in Springfield, MO 65802
When, or if you decide to split it up, let me know. I need everything but the actual transmission
When, or if you decide to split it up, let me know. I need everything but the actual transmission
I know, seems like the little swap parts are almost impossible to find. You catch the trannys a lot more often...
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top