Infiniti G20 Nissan Primera Forum banner

BC racing coilovers and addco rear sway bar

1516 Views 9 Replies 4 Participants Last post by  thesaint
Any of you guys runnimg the BC's with the sway bar ? and also do you have to specify when ordering that you need the ofset top mounts and pillow ball or do they come stock with for the fronts with purchase?
1 - 10 of 10 Posts
I've got BC's and stillen sway bar on one p11 and BC's and addco sway on the other, good setup.
Depending where you get the BC's I would read the description to verify what you are getting
i have bc's and a stillen rear sway bar. handles good . imo i would upgrade your rear trailing arm bushing for the best and most noticeable resutls. and bc's dont come will pillow ball mounts. they come stock with offset mounts. the only opition left open is spring rates
i have bc's and a stillen rear sway bar. handles good . imo i would upgrade your rear trailing arm bushing for the best and most noticeable resutls. and bc's dont come will pillow ball mounts. they come stock with offset mounts. the only opition left open is spring rates
This man speaks the truth
Ok kool , thanks guys i had Tein SS with the addco and it was good , i dont think im adding any bushings tho , i added delrin mount bushings and they broke my teins twice , first time i thought i over torqued and second time they broke was about 2 months after i got them back from repair and i found the problem to be the delrins , heck the delrins even snapped the stock shocks i put back on , so i rode with tein on the rear for a grand total of 3 months but the fronts have been on for 2 years + , im gonna try the Bc's now . and hope thats the last for a long time .
They need to have tapered holes inside so the shock can move thru it's sideways range of movement.
They need to have tapered holes inside so the shock can move thru it's sideways range of movement.
well it was a costly lesson , for me it took $140 us to ship them to repair and $320 to repair and return to me just the rear alone , so to do that again would be to much , at any rate the the delrins or on the shelf in my workshop alongside the broken tein shocks and broken stock shocks .
Your pm is full, tried to answer you.
Clear now
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top