Infiniti G20 Nissan Primera Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
41 Posts
Discussion Starter · #1 ·
Hi guys I was wondering what other cars have interchangeable bolt patterns with a p10. I'm in desperate need of rims and was looking to see if Ii could fine a 5 star wheel that would bolt up with a p10. Thanks-Bill
 

·
Registered
Joined
·
2,138 Posts
mitsubishi 4 bolts except for the mirage. center bore and offset work.
accords and preludes center bore is 64mm g20 is 66mm so may take somw work to fit them.
Accord 1990-1997 4 x 114.3 12 x 1.50 +46
Accord 4cyl. 1998-2002 4 x 114.3 12 x 1.50 +46
Prelude 1992-1996 4 x 114.3 12 x 1.50 +46
mazda center bore is too small
hyundai's should all work 67mm center bore
these acura's 64mm center bore
CL 2.2/3.0 1997-2000 4 x 114.3 12 x 1.50 +40
Legend 1986-1990 4 x 114.3 12 x 1.50 +40
TL 2.5 1995-1999 4 x 114.3 12 x 1.50 +40
nissans
wont work
NX-1600,2000 1991-1993 4 x 100 12 x 1.25 +40
Pulsar 1987-1990 4 x 100 12 x 1.25 +40
Sentra 1986-2000 4 x 100 12 x 1.25 +45
200SX 1995-1998 4 x 100 12 x 1.25 +45
will work
Altima 1993-2001 4 x 114.3 12 x 1.25 +42
Stanza 1990-1992 4 x 114.3 12 x 1.25 +42
Sentra 2000-2004 4 x 114.3 12 x 1.25 +42
SE-R / Spec-V 2003-2004 4 x 114.3 12 x 1.25 +42
200SX 1985-1988 4 x 114.3 12 x 1.25 +42
240SX 4cyl. 1995-1998 4 x 114.3 12 x 1.25 +42
240SX 1989-1994 4 x 114.3 12 x 1.25 +42
Suzuki center bore too small
Volvo S40, V40, T4 will work
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top