Infiniti G20 Nissan Primera Forum banner
1 - 20 of 21 Posts

·
Registered
Joined
·
155 Posts
Discussion Starter · #1 · (Edited)
From a 2001 touring (KH3), black interior. Forgive me for dirty items, will promise to clean them up before you buy haha. Prices are for picked up arrangements. Shipping is discouraged, but will consider.

- USDM cupholder insert. $15


- JDM shift surround. Came with the JDM center console I ordered, but I chose to stick with my USDM one. Has a crack up at the front of it, but it shouldn't be too noticeable once installed. $20



- JDM sunglasses holder. Went looking for another one since I lost the first one I bought. Well, I found the first one. I have two, so one's up for sale. You want this shit. $60



NRG black lugnuts x12 and locks x4 + tool. M12x1.5. NIB except for 3 for test fitting purposes, but realized they weren't the proper threading for either of my cars. Didn't screw on enough to ruin any threads. Still perfectly good! $70
 

·
Registered
Joined
·
1,444 Posts
For sunglasses holder:
Passenger holy-shit-handle bracket (USDM) can be mounted on driver's side with two small holes drilled in it for those pins to pass through, fits perfectly. No JDM bracket required.
 

·
Registered
Joined
·
53 Posts
For sunglasses holder:
Passenger holy-shit-handle bracket (USDM) can be mounted on driver's side with two small holes drilled in it for those pins to pass through, fits perfectly. No JDM bracket required.
So with that being said you would have to take the passenger bracket and move to driver side then mount the JDM sunglass holder with it? Please clarify un dummy terms if possible. Thanks.

Also @Dutch - Is this still available?
 

·
Registered
Joined
·
1,444 Posts
So with that being said you would have to take the passenger bracket and move to driver side then mount the JDM sunglass holder with it? Please clarify un dummy terms if possible. Thanks.

Also @Dutch - Is this still available?
You could do that, but then you'd have no holy shit handle on the passenger side and two holes in your headliner. I got one at a scrap yard for $2.
But yes, the holes line up perfectly when you flip it to driver's side, the only issue is that the two plastic pins that stick out of the sunglasses holder have nowhere to "poke through" on the USDM passenger bracket. Just line them up and mark the bracket with a pencil, then drill two holes big enough to fit the pins through and you're golden.
 

·
Registered
Joined
·
53 Posts
You could do that, but then you'd have no holy shit handle on the passenger side and two holes in your headliner. I got one at a scrap yard for $2.
But yes, the holes line up perfectly when you flip it to driver's side, the only issue is that the two plastic pins that stick out of the sunglasses holder have nowhere to "poke through" on the USDM passenger bracket. Just line them up and mark the bracket with a pencil, then drill two holes big enough to fit the pins through and you're golden.
How did you install yours then? You have pics? Just trying to see how this would work as right now i'm always tossing my glasses on the passenger seat. Thanks.
 
1 - 20 of 21 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top