[rmyc]

Hey, Im thinking about producing Intakes for the High and low port P10s

So far i'm looking at the sub $100 range for a Cold air intake( but if prices dont work out i'll just do ShortRam!)

Since i have both 2 highport and 2 low port g20's at my house.. i felt like i'd be a good canidate for these

I'm not going to be making money off them.. it's just to help the froums out.. i might require a donations for buyer to make to gnet.. Money talk would be later

So far i'v been thinking about having all the pipes black, and the filter and couplers blue( unless i can find a cheap source for black ones)
I'm Planning to have the Pipes powder coated, but if that ends up beign too much $$ i'll use hightemp paint, since intakes dont experience to much abuse



This is not going to be a deposite group buy, if ppl show intrest i'll make them and ship accordingly :naughty:


I'M Stoked bout this!!

-------------------

Updates

7/3/07 ​

Ordered some samples from here and there for test fitment and some bends to see which i can mod to use or not

7/4/07 ​

Received tracking info.

7/10/07 ​

Samples are got shipped to myhouse but i wont be able to work on them untill Friday the 13th because i'm out of town for work.

7/25/07 ​

Found a new supplier and setup a wholesale account with a TAX ID Number. Working out a deal with them--

7/31/07 ​

Samples are arriving tomorow via UPS C.O.D.

8/3/07 ​

Samples came in and they look super!!!, pics will follow soon

8/6/07 ​

PICTUREs on page 3

8/14/07 ​

http://www.g20.net/forum/showthread.php?t=67653
Vote!! so i can start ordering

10/4/07 ​

Dropped off samples at the powdercoater and should get results soon



-------------------

Status​

Intake Piping
MAF Adapter
Couplers
Filter
Clamps
Boxes
Powder Coating

Green=Complete
Orange=Havent decided on sources
Black=Searching...

 

[siberianbackstabber]

I would be down for a CAI for around 100-150 and black powder coating. I wont have the money til end of next month but would buy one

 

[rmyc]

I wont have the money til end of next month but would buy one

it wont be done for a few months, i'm hoping to get feedback in the next week so i can order order peices in 2 weeks, there's alot of planning todo

talk to vendors, find suppliers, order, testfit, pic, howto, mod parts, powdercoat, package, sell, ship... its going to take over 1 month.. but i wont let you guys down :teeth:

 

[Gally14]

Sorta OT, but I would be interested in the powdercoated pipes needed to make a full WAI.

 

[Uncle Dave]

Hi Port for me.
Also what size piping are you looking at?

 

[krookednose7]

lowport interest over here....also wondering about the size of piping....

 

[rmyc]

Pipe size.. hmm.. i dont know 2.5~3" / what ever is standard . Forsure not smaller than the TB or MAF

 

[krookednose7]

3" would be my preference....so you know...

 

[rmyc]

95% sure it's going to be 3"

 

[siberianbackstabber]

3" sounds good here to. Will this have the air temp sensor fitting on the piping? as for OBDII cars

 

["G"-sus!]

I voted for under (around) $100 b/c I just bought a short ram, damn it, I woulda waited if I only knew...As for powder coating you should have a poll for color if you decide to go w/ PC...I wouldn't waste your time w/ hi temp because thats something the end user could easily do.

Good luck! I think a lot of people (including myself) are excited to see where this goes!

 

[92_G20_SE]

I'm down for a high port one....I hope that you can make this happen.


Rob

 

[rmyc]

[QUOTE="G"-sus!]I voted for under (around) $100 b/c I just bought a short ram, damn it, I woulda waited if I only knew....[/QUOTE] Dont worry my goal is under $100 but incase something happens i left the price open :dead:

[QUOTE="G"-sus!]As for powder coating you should have a poll for color if you decide to go w/ PC....I wouldn't waste your time w/ hi temp because thats something the end user could easily do.![/QUOTE] i'm going to paint/PC them beacuse i'm going to add a logo of sort on it, because if this flys i might have to make like 30 sets for the sr20 guys..:shhh: sheeesh dont let them know. As for color, i havent decided but it's going to be some sort of really dark color. Powdercoating will cost more if i did color's per order. but we will all see once i get the stuff in .. This GB is just going to be a feeler and also a g20.net fundraiser, to cover the new server costs

3" sounds good here to. Will this have the air temp sensor fitting on the piping? as for OBDII cars

For the low ports IT WILL. i will have to look at some desgins and "borrow". :naughty:

to make it clear, i'm trying not to make money of gnet members... or maybe i should heheh . I just needed 2 CAI for my 2-p10's so i decided that i would just make some and help other members out and produce some $ for gnet. because no way in hell i'll pay +200 for Aem, or fujita

 

[FullMetal30]

I'd be interested as well

 

[rmyc]

[use the polls] if your interest, no need to post because 1-i'm not going to manualy count names, 2-i think i answered most of the Q's

 

[LilAznFishinDude]

Prepare to be the next Martin of CAI's :lol: You're going to have to make about a hundred of em...

 

[Sr20de02]

Hey, Im thinking about producing Intakes for the High and low port P10s

So far i'm looking at the sub $100 range for a Cold air intake( but if prices dont work out i'll just do ShortRam!)

Since i have both 2 highport and 2 low port g20's at my house.. i felt like i'd be a good canidate for these

I'm not going to be making money off them.. it's just to help the froums out.. i might require a donations for buyer to make to gnet.. Money talk would be later

So far i'v been thinking about having all the pipes black, and the filter and couplers blue( unless i can find a cheap source for black ones)
I'm Planning to have the Pipes powder coated, but if that ends up beign too much $$ i'll use hightemp paint, since intakes dont experience to much abuse



This is not going to be a deposite group buy, if ppl show intrest i'll make them and ship accordingly :naughty:


I'M Stoked bout this!!

I know this may be a stupid question, but i just want to know for sure, Will these intakes you may be making fit on the P11's also?

 

[NISSANS14NX]

Question.

CARB EO

That's important here in CA.

 

[g204life]

What is the diff between a high port and low port? If you had to high temp paint them, I would rather just have it in raw material. I have a friend the works at extreme turbo systems in la center. They do powder coating there. I can use there booth. I would pay between $60.00-$100.00 for a CAI

 

[rmyc]

As for P11's I dont think so, only the '99 share the design with the p10's

Carb legal? haha noo

Paint finish wont be decided untill i get the physical products