[specks]

I want to buy a header is this a good one does the inlet and outlet matter I don't know much plz help

DPT, HDS-NSG2091, T-304 Stainless Steel Chrome Exhaust Flex Pipe Manifold Header 2" Inlet with Gaskets and Bolts
http://www.amazon.com/dp/B00AHNHQUC/ref=cm_sw_r_an_am_ap_am_us?ie=UTF8

 

[tampa]

You're better off grabbing an ssac header off ebay or buying one off the forum... I think I saw one for sale not too long ago. Also you want to look for a 2.5 outlet if you can find one.

 

[Teachmehowto20]

all those ebay headers and the one u have their are pretty much the same,
SSAC is basically just a collective name for the lowest end header you can get. Its gonna give u a small power increase, no doubt, but it wont be as good as say a 20v header, or an ASP, or even hotshot.

That price isnt bad tho, u shouldnt pay more than 110$ for an SSAC.
But they are built wearily, as the tend to crack. Nevertheless its what most people on here run.

 

[roblop04]

ASP Header is the best way to go.. hands down.

 

[Teachmehowto20]

ASP Header is the best way to go.. hands down.

This
but since he asked about that header specifically and no other options i figured thats a little out of his budget.

 

[Greenless]

yeh thats the same as 90% of whats sold on ebay. i got 2 for under 100 shipped a few years ago. one went to the p11 and the other to the p10

 

[specks]

Thanks for the help guys and I'm not on a budget the job should be done right the first time for no future problems I wouldn't want it to crack and have to pay for another cheap one that will crack again when one good one will last me idk how much longer

 

[specks]

Any links to the asp or any other good ones that won't crack on me

 

[Teachmehowto20]

ASP only ones ull find are used, they run about 500$
If you really want a new one though, PM Snickers, hes the one who built them, im sure he could build you something, but be looking to pay about 1k$, well worth it though in build quality.

otherwise u should join the sr20 forums and see if anything non ebay/SSAC is f/s

 

[specks]

Will do thanks for the info

 

[roblop04]

http://www.g20.net/forum/showthread.php?125210-FS-ASP-Budget-header&highlight=nismog20t

here you go $400

 

[HP10DRIFTPRIMERA]

super sport auto chrome header not worth the shotty workmanship ,asp is awesome but expensive ive been happy with my fujitsubo

 

[meraredgti]

brand new asp for sale over on the Dash

 

[blankman3]

super sport auto chrome header not worth the shotty workmanship ,asp is awesome but expensive ive been happy with my fujitsubo

Where did you buy the fujitsubo?

 

[sr20beast]

ASP only ones ull find are used, they run about 500$
If you really want a new one though, PM Snickers, hes the one who built them, im sure he could build you something, but be looking to pay about 1k$, well worth it though in build quality.

otherwise u should join the sr20 forums and see if anything non ebay/SSAC is f/s

not to highjack the thread but if i was to find some on the forum from a 240sx yes i know its rwd haha but they wouldnt work on the p11 right?

 

[DMSentra]

Not at all.

 

[j-tek]

If you've got a ve, then I'd recommend asp or 20v headers. If your on stock de, a ssac with 2.5outlet would be good enough.

 

[benja455]

If you've got a ve, then I'd recommend asp or 20v headers. If your on stock de, a ssac with 2.5outlet would be good enough.

You aren't concerned about the SSAC cracking? The poor quality is what always holds me back from buying one.

 

[j-tek]

Lol.... do you even know what your talking about? Ssac is better than other no name headers in eBay. Ssac has been a popular choice for quite some time now. A lot of European ve'd Nissan sport ssac
headers.


If I was in the market for headers.. I'd buy the ssac and save the rest of my $$$ for a ve motor. You gets?

 

[Teachmehowto20]

Lol.... do you even know what your talking about? Ssac is better than other no name headers in eBay. Ssac has been a popular choice for quite some time now. A lot of European ve'd Nissan sport ssac
headers.


If I was in the market for headers.. I'd buy the ssac and save the rest of my $$$ for a ve motor. You gets?

SSAC's crack...
Charles literally calls them Super Shitty Always Crack.

But then again SSAC has been a one-all name for ebay headers.