hmmm...
HowTo: P10/P11 Install Low Profile License Plate Frame
2
Get yourself a couple feet of Rubber U Channel.
This stuff will be your "frame".
You can find some at your local hardware store and you can get round or square edges.
Look at this website to see what I'm talking about.
Wrap it around your plate and cut the excess with a razor blade, done.
Here's a couple shots of how mine turned out:
![]()
And a close up:
![]()
This stuff will be your "frame".
You can find some at your local hardware store and you can get round or square edges.
Look at this website to see what I'm talking about.
Wrap it around your plate and cut the excess with a razor blade, done.
Here's a couple shots of how mine turned out:
And a close up:
1 - 2 of 32 Posts
Is one strip enough for an entire license plate or do I need to get two?
1 - 2 of 32 Posts
