[CovertRussian]

Need a fuel rail for the round manifold JDM roller rocker. No longer needed

 

[sixnineG]

I think the p10 one should work if I'm not mistaken.

 

[CovertRussian]

I'll try it out tonight, they all have different mounting points, so if it does work it will only bolt up on one or two holes. Low port one is close bolt wise, just don't know if it's close enough. Trying not to have car down time

 

[sixnineG]

My cousin took the rail and I don't know if he used the whole rail or just the injectors on his p10.

 

[j-tek]

Will a us RR work? I have 1 avail. free, just cover shipping

 

[CovertRussian]

Sadly it wont, mainly because USDM is top feed. I will attempt a highport one, but something tells me it's different too.

 

[CovertRussian]

Confirmed, High Port and VE fuel rails will not work. Not 100% on lowport, at least not until I pull it off the current LP manifold.

 

[j-tek]

Can't you run a custom rail?

 

[CovertRussian]

Can't you run a custom rail?

I'm going to try with low port, but it's not worth it to buy custom. All I want to do is test power gains/losses between Lowport mani and JDM RR. I already tested USDM RR vs Lowport to find that Lowport flows a ton better.

 

[sixnineG]

when the jdm rr makes more power you can sell it back to me.:nervous: