My New P11 - SR20DET

5314 Views 16 Replies 10 Participants Last post by j-tek, Oct 21, 2013

Shudsy

Discussion Starter · Sep 3, 2013

5

Hi all,

I've just picked myself up a new ride and thought I would share a few pics, and maybe get some opinions where to go from here.

As above, I didn't build this car so I can't take any credit. However I'm open to suggestions for any future mods.

Current notable mods

Performance:

W10 SR20DET, Front Mounted Intercooler, HKS SSQV, 3” Stainless Steel Intake pipe and K&N Pod, NGK Silicon Leads, New Plugs, 40mm Core Radiator, Full 2 ½” mandrel bent exhaust, Dobi Performance Springs, Tein Street Spec Type NA Shocks, Heavy Duty Clutch, Braided Brake Lines, Bendix Pads, DBA Slotted Rotors

Visual:

Modified front bumper, Camino side skirts and end caps, Nismo Grille, Facelift Headlights, DTM 099’s(17’s), Tinted Rear Lights, Debadged, 35% tints, Custom front window banner, Despoilered, Clear Side Indicators, Vinyled parcel tray, Kenwood 6x9’s, 6”s, 2x12” Subs, Amp and head unit, Nismo Gear Knob, Short Shifter, Painted Dash bits, Smoked lense gauges (Oil Press, Oil Temp, Boost), Painted Rocker Cover, Nismo Oil Cap, Silicon radiator hoses

See less See more

1 - 17 of 17 Posts

KH2P10

· #2 · Sep 3, 2013

Such a nice p11!

Honestly the only thing I would change is the tire's. I think a 215/45/17 or maybe 225/45/17 would look better just to make the gards look fuller. apart from that car looks amazing.

Have you joined NZ Primera car club?

Shudsy

Discussion Starter · #3 · Sep 3, 2013

No I haven't, it's on the agenda though. I'm really interested in getting into a club like that. As you're probably aware the previous owner was a member. I even took his pictures cause they're so much better then my own haha.

JaGG20

· #4 · Sep 3, 2013

Gorgeous!!

SarCaZm

· #5 · Sep 3, 2013

Nice, i've seen this before too. good pick up

roblop04

· #6 · Sep 3, 2013

wow... TE-V bumper and your golden..

Prime G

· #7 · Sep 3, 2013

leave it the way it is.

Shudsy

Discussion Starter · #8 · Sep 7, 2013

Thanks for the kind words everyone

@roblop04: Those bumpers look awesome, I'll definitely look into them!

Aloha20t

· #9 · Sep 7, 2013

looks hot as is! id ditch the black mouth on the bumper though. get some fog lights too if it suits you. are the tails tinted? if so Id remove the tint too. Yup you should link up with the NZPCC guys. congrats on the new ride

roblop04

· #10 · Sep 7, 2013

I need to get me some skirts like that.. So is it hard to find skirts like that over there?

Shudsy

Discussion Starter · #11 · Sep 7, 2013

Aloha20t said:
looks hot as is! id ditch the black mouth on the bumper though. get some fog lights too if it suits you. are the tails tinted? if so Id remove the tint too. Yup you should link up with the NZPCC guys. congrats on the new ride

Thanks for your input. I'm going to be respraying the front bumper in the very near future and I'm still undecided as to keep the black lip or not. As for the tail lights, yes they are tinted. I also have a stock set of tail lights so I can change them as it suits me

. The fog lights had to be removed so the piping for the FMC could fit properly so they're a no go

roblop04 said:
I need to get me some skirts like that.. So is it hard to find skirts like that over there?

Nope not difficult at all. They're factory on every 2nd P11 haha

roblop04

· #12 · Sep 9, 2013

Shudsy said:
Nope not difficult at all. They're factory on every 2nd P11 haha

would you be able to hook me up? lol. I would be willing to pay plus shipping for some skirts.. PM me...

cramordap

· #13 · Sep 9, 2013

I'd get fog lights. I am sure you can buy from Jeff. Aside from. Keep as is! Sexy as fuck!

Shudsy

Discussion Starter · #14 · Sep 11, 2013

cramordap said:
I'd get fog lights. I am sure you can buy from Jeff. Aside from. Keep as is! Sexy as fuck!

I'll look into it but they had to be removed so the FMC piping would fit. Cheers for the kind words

crispy_11

· #15 · Sep 11, 2013

Wow that engine bay looks so clean, the black valve cover is gorgeous! Yup I would say TE-V front, ditch the tinted tails for some oem ones, and maybe a roof wing if your into that sort of look and she'd look perfect! But that's just how I would do it, otherwise she looks great the way she is! Nice pick-up, crazy jealous.

Sent from AutoGuide.com Free App

Shudsy

Discussion Starter · #16 · Oct 21, 2013

crispy_11 said:
Wow that engine bay looks so clean, the black valve cover is gorgeous! Yup I would say TE-V front, ditch the tinted tails for some oem ones, and maybe a roof wing if your into that sort of look and she'd look perfect! But that's just how I would do it, otherwise she looks great the way she is! Nice pick-up, crazy jealous.

Sent from AutoGuide.com Free App

Thanks man!

I'm pleased to inform you that the taillights have been swapped out for OEM ones (I've actually got a set of both for whichever mood I'm in). I do have to admit though that I'm not keen on roof wings at all and I'm still looking for a TE-V bumper.

j-tek

· #17 · Oct 21, 2013

I'll send you a TEV bumper if you can ship primera 144 parts

1 - 17 of 17 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.