Infiniti G20 Nissan Primera Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Hi guys,so I'm trying to scan my 99 P11 with this cheap tool from Amazon I bought months ago,the thing is I can't seem to scan it but the tool works with other cars we have in my house (2002 Civic EP3,2004 Infiniti G35,and,2002 Corolla) but with the P11 won't work,I've seen theres a Nissan OBD adapter but it's OBD1 to OBD2 (I'm assuming the 99 G20 is OBD2) and some type of screw in the ecu but I'm not sure were to start so I can put this to work,does anyone knows exactly what's going on? Or is it just the cheap scan tool that doesn't reach to the ecu? Thanks




20032
20033
20034
20035
20036
20037
20038
 

·
Registered
Joined
·
20,893 Posts
It is OBDII, but it isn't CANBUS.

Is there a way to change the settings in the tool from using ISO 15765-4 back to an old K-line style ISO 9141?
 

·
Registered
Joined
·
2 Posts
Discussion Starter #3
It is OBDII, but it isn't CANBUS.

Is there a way to change the settings in the tool from using ISO 15765-4 back to an old K-line style ISO 9141?
Unfortunately it doesn't,only thing it has is change the language and the unit of measure,I won't take the car to Autozone or similar store because the last time their scanner didn't even turned on when they plug it! They always have a problem with parts/scanning when it comes to Nissan or Infiniti,I might get a better scan tool...
 
1 - 3 of 3 Posts
Top