Infiniti G20 Nissan Primera Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
So my starter recently crapped out and I stupidly tried some tests to check if the starter was still good.

One test was putting a jumper in the IGN relay and jumping male terminals by passing the relay security. Well, I jumped the wrong ones and fried a ground wire. Repaired the ground but now I have no power at terminal 1. I have read wire diagrams but still cant seem to find or trace the wire to see why it has no power.

I've ripped out every fuse and all are good so I'm at a loss.

Any ideas where TERMINAL 1 starts and ends?

I'd really love to put my relay back in and not to bypass my security for every start up. Thanks in advance!
 
1 - 1 of 1 Posts
Top