Infiniti G20 Nissan Primera Forum banner

1 - 20 of 50 Posts

·
Registered
Joined
·
7,574 Posts
Discussion Starter #1 (Edited)
Alright fellas, this is probably one of the last threads when it comes to selling parts of my P11. Here comes the list:

SR20VE Goodies
-SR20VE *clean clean motor* - $1400 (you pay for shipping)
-SR20VE Outlaw Engineering spacers - $120 shipped
-Universal NOS complete wet nitrous kit w/50 shot jet & 10lb bottle *brand spanking new* - $380 (you pay for shipping)

Tranny Stuff
-Clutchnet Lightened flywheel (used by in great condition) - SOLD
-Clutchnet fiber fiber clutch *used but good for N/A power* - $70 shipped
-Clutchnet HD Pressure plate - $110 shipped
-Yahnozha Group Buy shortshifter *new* - SOLD
-Yahnozha Custom Steel rear shifter stabilizer bracket *new* - SOLD

Suspension Stuff
-Stillen front strut bar *aluminum* - SOLD
-Stillen rear strut bar "" - SOLD
-Stillen rear sway bar *discontinued part* - $350 shipped
-HP Racing EVO 18x7.5" wheels w/Toyo Proxes 2 85% thread left, 2 55% thread left - $500 BUT one wheel needs to be replaced which I can get

Turbo Stuff
-VRS full 3" mandrel bent exhaust with magnaflow muffler *sounds sick* - $340 shipped
-Precision Turbo Intercooler with P11 custom crossmember plate - $340 shipped
-Blitz Dual SBC SPEC R Electronic Boost Controller (Dual Solenoid) - $300 shipped
-Mototron 50lb top feed injectors *new* perfect for roller motor - $260 shipped
-Custom Andreas Miko ~aluminum~ T3/T04 Turbo intake pipe with custom roller rocker MAF insert (bigger area then stock MAF) and recirculation weld - $100 shipped
-Autometer silver faced EGT gauge - $80 shipped
-Autometer silver faced boost gauge - $40 shipped
-Autometer silver faced Air/Fuel gauge - $35 shipped
-Automer silver faced oil pressure gauge *new in box (electric) - $45 shipped
-VRS P11 2.5" to 3" collector and 3" downpipe with EGT bung $220.00 shipped
-Slim fans (flow 3 times better than stock and sound BMWish) - SOLD

Naturally Aspirated Stuff
-Red Samco silicone radiator hoses - SOLD
-2002 Infiniti G20 stock MAF - SOLD
-300ZX Autometer gauge pod (fits snugly on the P11) - SOLD

JDM & UKDM Stuff
-Factory Nissan Altia Spoiler exactly as the one pictured painted darker Primera gray - $250.00 + shipping. It bolts right up to your stock trunk, but the connector to the brake light is broken so youll have to wire tap into the wires on your trunk (easy).


-P11 Primera GT badges (no Nissan badge included) w/black surround " very sporty" around Primera and GT
SOLD

PLEASE ADD 3% PAYPAL FEES OR YOUR PAYMENT WILL BE REFUNDED

FIRST COME FIRST SERVE, MONEY TALKS BULLSHIT WALKS
 

·
Internet Mechanic
Joined
·
2,256 Posts
dibs short shifter and possibly rear bracket
 

·
♥
Joined
·
3,947 Posts
-HP Racing EVO 18x7.5" wheels w/Toyo Proxes 2 85% thread left, 2 55% thread left - $500 BUT one wheel needs to be replaced which I can get

whats wrong with the one wheel(ie. curbed, wobbles, road noise?) does that price include the new wheel?
 

·
Registered
Joined
·
7,574 Posts
Discussion Starter #4
AzG20P11 said:
-HP Racing EVO 18x7.5" wheels w/Toyo Proxes 2 85% thread left, 2 55% thread left - $500 BUT one wheel needs to be replaced which I can get

whats wrong with the one wheel(ie. curbed, wobbles, road noise?) does that price include the new wheel?
The one wheel took a hard impact when the car hit the wall on an edge in the center of the wheel which resulted in a broken P11 cv joint. The wheel is not bad, but I dont think it should be driven on. My friend owns a wheel shop, he told me he could sell me the wheel on display for $140+-, it seems HP has come out with the same wheel with a chrome lip, they are selling at over $200 a wheel new now so he needs to get rid of the one he has on display. I just never got around to go buy it. The price does not include the new wheel. The tires alone were quite pricey.
 

·
Registered
Joined
·
7,574 Posts
Discussion Starter #7
bilar204 said:
hey..new buyer of g20...was wonderin wat to look for in the car im buying...does a G20 have timing belt?..also the car needs new motor mounts..are they cheap and where can i find them?
Thread hi-jacker of the year award goes to you. This is a for sale thread, please use the search button or make your own thread. Thanks
 

·
Registered
Joined
·
7,574 Posts
Discussion Starter #9
Ugly said:
dibs on Stillen front strut bar...sending PM :smile:
Just missed it dude, they both just sold.
 

·
Registered
Joined
·
968 Posts
If the Stock MAF for the 02 fits on my 00 then consider it sold. Second dibs on the short shifter.
 

·
Registered
Joined
·
7,574 Posts
Discussion Starter #11
e_fizzy said:
If the Stock MAF for the 02 fits on my 00 then consider it sold. Second dibs on the short shifter.
Yes sir it does. From a 2000-2002 it fits. Any roller rocker motor. The short shifter is pending sale.
 

·
*BANNED FROM G20.NET*
Joined
·
4,911 Posts
Domiken said:
Just missed it dude, they both just sold.
F****************************************CK!!!!!!!!!! :*(



...I love how my 500th post is that^^^^ hahahaha :p


Good luck with the sale broham =)
 

·
Internet Mechanic
Joined
·
2,256 Posts
Domiken said:
Thread hi-jacker of the year award goes to you. This is a for sale thread, please use the search button or make your own thread. Thanks
Same newbie posted the same questions in our thread about Stardust (scammer who said he was parting out a p11)
 

·
G20 OG
Joined
·
6,684 Posts
hope some of this stuff is still here next week...

BTW can you give more info or a picture of:
-VRS P11 2.5" to 3" collector and 3" downpipe with EGT bung $220.00 shipped
it says its for NA, but i dont get it, is it part of a header or what? and if it is what primaries does it fit?

Also
-300ZX Autometer gauge pod (fits snugly on the P11) - $30 shipped
Where does it go? in the din or on the pillar
 

·
Registered
Joined
·
7,574 Posts
Discussion Starter #17
tealturboser said:
hope some of this stuff is still here next week...

BTW can you give more info or a picture of:
-VRS P11 2.5" to 3" collector and 3" downpipe with EGT bung $220.00 shipped
it says its for NA, but i dont get it, is it part of a header or what? and if it is what primaries does it fit?

Also
-300ZX Autometer gauge pod (fits snugly on the P11) - $30 shipped
Where does it go? in the din or on the pillar
Damn I screwed up, thats is basically just the downpipe from a T3/T4 series turbo.





The 300ZX autometer gauge pillar pod is SOLD

e_fizzy said:
So paypal 56.65 right Dom. I need your paypal addy.
[email protected]

primerat said:
40 for the primera badges and my brother will come pick them up from you.
Sounds good to me
 

·
Registered
Joined
·
7,574 Posts
Discussion Starter #20
MoTown said:
do you have the infiniti badges by any chance?
No sorry I dont
 
1 - 20 of 50 Posts
Top