Infiniti G20 Nissan Primera Forum banner
1 - 20 of 30 Posts

·
Registered
Joined
·
375 Posts
Discussion Starter · #1 ·
Looking for a powder coated or crinkle coated valve cover and I can't determine which ones will fit and which ones wont. There are 50 million valve cover designs for the SR20.

Help!
 

·
Registered
Joined
·
8,172 Posts
00-01 sentra SE if you want it to say nissan or 00-02 infiniti g20 if you want infiniti on it. To get a PC or crinkle you will need to have it done. Only the VE models came with PC'd valve covers. They come in black, red and blue but also have a VE badge on them. You don't want that. That is ricer.

If you have it done go with these guys http://www.trgcoating.com/. They are top notch.
 

·
Registered
Joined
·
86 Posts
00-01 sentra SE if you want it to say nissan or 00-02 infiniti g20 if you want infiniti on it. To get a PC or crinkle you will need to have it done. Only the VE models came with PC'd valve covers. They come in black, red and blue but also have a VE badge on them. You don't want that. That is ricer.

If you have it done go with these guys http://www.trgcoating.com/. They are top notch.
What do you mean thats ricer????? Hahahaha
 

·
Registered
Joined
·
1,229 Posts
Roller Rockers can user ANY FWD SR20 valve covers. Non Roller Rockers can use most FWD SR20 valve covers (except Roller Rocker one). Roller Rocker's VC has baffles that sit too low to the cams, thus if you have a motor with cam oilers, it will not clear them.

By leaving the VVL badge on the VC when you dont have VVL. It's a sticker, you can remove it.
Make sure you peal it and repaint, it took my paint off...
 
1 - 20 of 30 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top