Infiniti G20 Nissan Primera Forum banner

strongflex bushings for p11 suspension?

2K views 5 replies 5 participants last post by  Arias 
#1 ·
#5 ·
I had to use different lower control arm rearward bushing housings as the strongflex bushing was too small for the oem ones. The upper control arms and the swaybar and endlinks fit fine. I dont see long term use out of the lca rearward bushing as it still has a little play, even with eudm control arms now...( these ship from Poland)
best of luck to you-
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top