[happynole]

Does anyone have a parts list for the SR20 kit? I have a set of spacers but need to know the correct bolts/studs I need to source to install on my VE

 

[JDM_Ej]

I've never done this on an SR motor, but I did have a similar piece on my Honda B18C5 motor.... I didn't need any additional/longer studs or bolts. It fit with stock hardware.

 

[Kirru]

Wont fit with stock hardware on the VE. Bolts and studs aren't long enough.

Though I can't tell you the lengths as mine in on the car.

 

[DMSentra]

Joe, add the thickness of the spacer to the length of the oem studs.

 

[Evolver79]

I ordered my spacers for my VE from Outlaw Engineering. Their kit bolted right up with no issues. If you already have the spacers, maybe they'll sell you the hardware?

 

[happynole]

Outlaw's website is down, and it has been down for a while as far as I can tell. When did you buy your spacers?

 

[Evolver79]

I ordered them May of this year. It was a very fast process. Here's the email:

[email protected]

 

[happynole]

I ordered them May of this year. It was a very fast process. Here's the email:

[email protected]

Thanks for the info, I just dropped them a request.