WTB: P10 5-speed parts

I got 1. Was running a VE setup with it. Worked good when the VE was pulled. Email me at [email protected] if you're interested.

Good engine harnesses can be tough to come by. We had to piece together a good engine harness from 3 we removed from cars ourselves. Now we keep those hacked up harness for backup pieces when needed. ....so just make sure you get good detail photos showing all the connectors, etc of any harness you buy that you don't pull yourself. The potential problem with harnesses around here is 'green death' from prolonged under-water exposure (why we tend to avoid trying to take harnesses from local junkyards and wait for phoenix trips)

Anyway, Gluck on the search!

By the way. The car was from GA. Only been in the midwest for 1 years.

Email sent.

PMed you about a P10 I remember seeing at the MESA pickapart Dec 27, 2013 with manual trans and harness and engine still in it! $30 is their price btw (of course you have to do the labor yourself to remove it and then there is a yard entry fee)...

Chris said:

PMed you about a P10 I remember seeing at the MESA pickapart Dec 27, 2013 with manual trans and harness and engine still in it! $30 is their price btw (of course you have to do the labor yourself to remove it and then there is a yard entry fee)...

Click to expand...

None of the P10's there are OBD2 though.

I have an Sr16 obd2 flywheel/clutch setup available.

Sealti96 said:

I have an Sr16 obd2 flywheel/clutch setup available.

Click to expand...

I already bought an exedy clutch / 10lb flywheel combo off eBay. Thanks though.

Harness might be taken care of, still looking for a complete set of bolts/washers for the pressure plate and flywheel.