Infiniti G20 Nissan Primera Forum banner
1 - 20 of 20 Posts

·
Registered
Joined
·
357 Posts
Discussion Starter · #1 ·
i need a wastegate for my W10 t25+bracket and little clip for the wastegate i bought it locally and the guy lost it so if you could help me out that would be great

or just let me know about these ebay ones not sure if they will work if you have experience with them lmk thanks! only thing is it looks like the ebay ones dont come with bracket but ones that do dont look like right brackets

without bracket
http://www.ebay.com/itm/T25-T28-GT2...Parts_Accessories&hash=item2571d44ca2&vxp=mtr

with
http://www.ebay.com/itm/Internal-Wa...Parts_Accessories&hash=item4ac17cd3d2&vxp=mtr
 

·
Registered
Joined
·
946 Posts
I'll check this weekend if you haven't found anything. I'm pulling a T25 BB and have a GTIR T28 sitting in the garage.
 

·
Registered
Joined
·
136 Posts
Both work. Been using the first on on my t25 for over 9 months no problem. And the little clip to hold the wastegate on u can get from Home Depot n the hardware section.
 

·
Registered
Joined
·
3,523 Posts
T28 waste gate is must larger than t25.
The small clip can be found at ay parts store in the little packs that come with several sizes
Also t25 waste gate runs 7 psi, t28 runs 9psi stock. And the bracket is larger to fit the compression housing for the t28 but can be made to fit with some welding and innovation
 
1 - 20 of 20 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top